Difference between revisions of "Unit Datasheet Creation"

From 30 Minute Missions: Wargame
 
(201 intermediate revisions by 3 users not shown)
Line 1: Line 1:
THIS IS A WORK IN PROGRESS. THE INFORMATION IS MOSTLY UP-TO-DATE, BUT NEW VERSIONS OF THE DATASHEETS NEED TO BE UPLOADED.
__TOC__


== Datasheet Breakdown ==
'''Current Datasheet Version:''' 6.0


'''Future Datasheet Version:''' 6.1 & 6.1t (TBD)


Once your Model is complete and ready to battle, open up the blank Datasheet that corresponds to your Units Core Type. There, you will need to document all of your Core Sections, Weapons, Equipment, Mounted Weapons, Shields, Systems, and Mods. It may look like a lot but we will break everything down into segments:
Once your Model is complete and ready for battle, open up the blank Datasheet that corresponds to your Unit's Core Type. This can be found by determining what kit the Unit's chest piece came from. If the chest piece is from the Alto kit, then the Core Type will be Alto. If the chest piece is from the Revernova kit, then the Core Type will be Revernova. If you have multiple chest pieces on your unit OR none at all, you may pick one that best fits your Unit.


*'''Core Parts'''
Once you have downloaded the correct datasheet, you will need to document all of your Unit Sections, Weapons, Mounted Weapons, Equipment, Shields, Systems, and Mods. It may look like a lot but we will break everything down into segments.
*'''Core Sections'''
*'''Weapon/Equipment Parts'''
*'''Weapon/Equipment Stats'''
*'''Core Sections'''.  


Before we get into how to create a Datasheet, we will first identify each area on the Datasheet itself.


== Core Parts ==
[[File:Datasheet Visual.png|link=|600px|left|]]
[[File:Porta CV.png|link=|frame|right| Portanova Core Parts. Also shows how each one is separated.]]
The Core Parts section on the left-hand side of the Datasheet is where players put down all parts on the model that are considered Core Parts: those that make up the head, legs, arms, and torso of the Unit. Weapons and Equipment are not Core Parts and should not be added to this list.


On the top, you see 3 titles: '''Name''', '''Notation''', and '''Defense'''. In the Name column, you will put down the name of the specific part listed on your model.  Most parts share the same names, so in order to differentiate which part belongs to which model, we use specific model Notations.  
# '''Unit Sections''' - Each Unit is made up of different sections. Each section has a max defense and current defense. The max defense is the maximum amount of damage that section can withstand before being destroyed. The current defense is a blank area that should be used when damage is taken but the section remains intact. The remaining defense value should be written here. At the bottom is Total Defense. All Unit Sections will combine their Max Def. and the value will be written here. This value is the base Deployment Cost of your Unit without any weapons, pilots, or SMTs.
# '''Specifications''' - This shows the Units Classification, Base Action Points, Standard Movement, and Thruster Movement. Classification is based on the Units' Total Defense value and determines Base AP and Standard Movement. The classification chart can be found here [[Core Rules#Classification| under the classification section]]. Base AP is how many Action Points a Unit has before they make an AP Roll* during gameplay. Standard Movement shows the maximum amount of hexes a Unit can move during its turn. Thruster Movement is only available for Units with thrusters. Thruster Durability is the combined durability of all of the Units thrusters. This is to show which standard movement options that Unit can use.
# '''Modified Stats''' - This shows Accuracy, Assault, & Evasion stats. Accuracy is for long-ranged targets. Assault is for close-range targets, and evasion is for evading incoming attacks.<br />Each one has a base stat value under the larger modified value. Base stats derive from the Core Type. The modified stat references the base stat AFTER it's been modified by the player. Depending on the pilot's rank, the player gets Stat Reduction Modifiers (SRM for short). These points allow the Units base stats to be lowered to better fit the players' play style. The lowest modified stats can be is 2 for each stat (or 2/2/2) and the highest cannot go past their original base stats. Systems, Mods, and Traits can also modify stats.
# '''Core Type''' - Determines the base stats of the Unit. These can be found inside the modified stats section. Core type is determined by what chest piece is used in the creation of the mech. Each Core Type has different stats. They are represented by an image in this box.
# '''Unit Information''' - This is the name and type of unit. The type of unit will determine it's primary movement.
# '''Pilot Information''' - This is the name, Rank,  and cost of the Pilot. The Pilot determines how many Mods, Traits, and Stat Reduction Modifiers (SRM) the unit has.
# '''Systems, Mods, & Traits''' - These are special abilities and bonuses that a player can use the further customize their Unit. Systems become available for a Unit based on what they have physically on the model. The maximum amount of Systems a Unit can use at one time is 5, so choose wisely! If you have weapons that have the same Systems, you only need to add it to a single System slot.  Mods and Traits are non-physical abilities/bonuses based on various factors. The amount of Mods and Traits a player can use is limited by the pilot's rank.
# '''Weapons & Equipment Inventory''' - This is where all of the Units' weapons, mounted weapons, thrusters, Shields, and equipment are identified. Along the top, you will see 9 columns. These columns identify the specifics of each weapon.<br />At the bottom of the inventory, you will also see Total Thruster Durability and Total Inventory DC. If a Unit has thrusters, you would combine all of their durability here. As for the Total Inventory DC, you simply combine the DC of everything in your inventory and put the value in the dedicated area.
#* Name - What you call the weapon.
#* Tags - Category, requirements, and/or bonuses for the weapon.
#* Location - Where the weapon is located on the Unit. Head, Torso, Left Arm, ETC.
#* Range - How many hexes the weapon can fire from.
#* Base Damage - How much damage, per shot, the weapon does.
#* AP (Action Points) - How much AP it costs to fire the weapon once.
#* Type - Dictates if the weapon fires projectiles or pure energy.
#* Durability - How much defense the weapon has until it is destroyed.
#* DC (Deployment Cost) - How much it costs for the Unit to field the weapon.
# '''Deployment Cost''' - This is the total cost to field this Unit. This is the combined sum of the Units' Total Defense, Systems DC, Total Inventory DC, and Pilot Rank DC.
 
== Unit Sections ==
[[File:Unit Sections.png|link=|300px|left|]]
Each individual piece that makes up the Unit is considered a part. When you combine parts into limbs, heads, torsos, etc, these are called Unit Sections.
 
First, you must identify how many Unit Sections your Unit has and what each one is. Most Mech Units have a Head, Left Arm, Right Arm, Torso, Left Leg, and Right Leg as Unit Sections. Vehicles on the other hand have a Cockpit and at least one drive section. More information can be found in [[Core Rules#Unit Types|the Unit Types]] section of the Core Rules.
 
Once you have listed each of your Unit's Unit Sections, you will then need to determine the Max Defense of each one. To do this, you will need to open up the [https://docs.google.com/spreadsheets/d/17BZ1F7FpO5finnEYQVINvdjePFtv_WhdVBI6JZ_mXLk/edit#gid=1360820555 Parts & Data] sheet. There is a tab with the name '''Parts Search'''. Here you can locate the stats for each part of your Unit by part name, kit name, or various other things. Once you are familiar with that, move to the '''Core Section Calculator''' tab. Here is where you will add the Name and Notation of each part that makes up a single Core Section. You don't need to use the calculator if you are already familiar with the process but it is recommended as it will get you familiar with the process of using our calculators.
 
=== Unit Section Calculator ===
[[File:Unit Section Calculator.png |450px |right]]
On the top, you will see 3 titles: '''Name''', '''Notation''', and '''Defense'''. In the Name column, you will put down the name of the specific part listed on your Unit's model.  Most parts share the same names, so in order to differentiate which part belongs to which model, we use specific model Notations.  


'''Notations''' are broken down into what packs they come from and which unit they belong to.
'''Notations''' are broken down into what packs they come from and which unit they belong to.
For example, PN-15 is the PortaNova-15. The Weapons Pack 1 for the Portanova is W1-15. Similarly, the Alto-17 is AL-17. The Weapons Pack for Alto is W1-17.  
For example, PN-15 is the PortaNova-15. The Weapons Pack 1 for the Portanova is W1-15. Similarly, the Alto-17 is AL-17. The Weapons Pack for Alto is W1-17.  


The Defense values are determined by which Unit is being used and what its purpose is. In this column, this is done automatically once the Name and Notation are added. The Defense value will only populate if the Name and Notation match exactly! If a value fails to auto-populate, check the spelling. If it still does not work, notify a Developer on the discord then type the value in yourself.
The Defense values are determined by which Unit is being used and what its purpose is. In this column, this is done automatically once the Name and Notation are added. The Defense value will only populate if the Name and Notation match exactly! If a value fails to auto-populate, check the spelling. If it still does not work, notify a Developer on the [https://discord.gg/8XZYd5dWGk Discord] then type the value in yourself.
 
You may have noticed that there are multiple parts of the same name. This is because most Units are symmetrical and use the same parts for both sides of the Unit- two arms and two legs. This organizational system helps with the design of asymmetrical Units.
 
</br>
[[File:Sections and Parts.png |center|500px]]
 
The image on the above is an example of what a standard out-of-the-box Portanova-15 looks like when each piece is broken down and added to the Core Section List.
 
=== Torso & Cockpit Stats ===
 
The Torso and Cockpits, or Pilot Sections, give base stats for the unit which can be improved when adding a Pilot. Each Pilot Section has varying stats and may be chosen even if the unit does not visibly use that section. The stats can be found in the Parts and Datasheet, linked below.
 
== Pilot Creation ==
<div class="mw-collapsible-content">
# '''Name''' - Give your Pilot a name.
# '''Rank''' - Give your Pilot a Rank/Artificial Intelligence.
#* Use the chart and fill in the appropriate field. [[Image:PilotRankChart.png|right]]
#* The Higher the rank, the more bonuses you receive - however, you will pay a higher Deployment Cost
#* Ranks range from 1-5.
#* A.I.s range from Simple to Intermediate to Advanced.
# '''Determine Stats''' - Stats determine how well a Unit can fight.
#* Once a Rank/AI has been chosen, fill in the Stat Reduction Modifiers (S.R.M.), Available Mods, and Available Traits.
#* Stats are listed on the right side of each Rank/A.I. level on the Pilot ID chart.
# '''Choose your Pilot's Traits'' - Traits are stronger than average Abilities
#* The number of Available Traits is based on Rank.
#* The complete list of Pilot Traits can be found on the [https://docs.google.com/spreadsheets/d/17BZ1F7FpO5finnEYQVINvdjePFtv_WhdVBI6JZ_mXLk/edit#gid=1319329094 Parts List] below.
# '''Determine your Pilot's Deployment Cost'''
#* The far-right column labeled as "DC" is the Rank/A.I.'s corresponding Deployment Cost.
#* Write that number down in the upper right area.
Your newly created Pilot is ready to be paired up with a Unit!
</div>
</div>
<br clear=all>
== Weapons & Equipment ==
If you want to win a war, you need weapons and equipment. These are the primary ways you will be able to subjugate and destroy your opponents. In this section, you will learn about the various weapons and equipments as well as how to properly create them and add them to your Units datasheet.
 
=== Tags ===
Before you can fully understand how the 30MM: Wargame allows a player to build almost any weapon they want, you must first understand how Tags work. Tags are a way to specify, at a glance, what ability correlates to what weapon/equipment and how it functions in the game. Tags are represented by two letters, numbers, or a combination of the two inside of brackets. For example, the category '''Hand-Held Weapon''' is represented by the tag '''[WN]'''. When you look at a Units datasheet and see a weapon in the inventory with the tag [WN], you will know that it's a hand-held weapon. Combining multiple tags to customize your weapons or equipment is a basic operation that you will get more familiar with as you build your datasheets.
 
Multiple tags are arranged in sequential order. The first 3 tags identify the function while the proceeding tags identify any abilities it might give a Unit. Below is the order each tag will be in along with the various different tags in each.
 
#'''Category'''
#*[WN] Hand-Held Weapon
#*[MW] Mounted Weapon
#*[EQ] Attachment
#*[SD] Shield
#*[TH] Thruster
#'''Mechanism'''
#*[MG] Full Auto
#*[GB] 2For1
#*[SG] Spread Shot
#*[EO] Splash Damage
#*[MH] Multihit
#*[OC] Overcharge
#'''Prerequisites'''
#*[2H] Two-Handed - A Unit must have, at least, 2 hands available in order to use this weapon. If they do not, then +5 AP cost will be added to the weapon.
#*[RC] Recharge - After firing the weapon once, place a recharge token down. The unit is unable to fire again until its next 2 activations.
#'''Available Systems'''
#*Check the Google Document to view current and up-to-date Systems on the page [[Abilities]].
 
For example, the tags [WN][MG][2H] identify a two-handed weapon with the System "Full Auto". The tags [MW][EO] identify a mounted weapon with the System "Splash Damage".
 
=== Weapons ===
Weapons are broken down into 2 categories:


There are multiple parts of the same name. This is because most Units are symmetrical and use the same parts for both sides. This organizational system helps with the design of asymmetrical Units.
* Ranged Weapons
* Melee Weapons


The image on the right is an example of what a standard out-of-the-box Portanova-15 looks like when each piece is broken down and added to the Core Parts List. Take note of how there are multiple of the same pieces (arm, forearm, hand, etc). This is because each Unit has two arms and two legs.
Ranged Weapons can engage targets beyond 1 hex. Melee Weapons can only engage targets from a single hex distance. Unless otherwise stated, all Weapons with a range of 1 are Melee Weapons. Both categories can be further broken down into 2 types: Kinetic and Energy. Generally speaking, Kinetic Weapons deal less Base Damage but also require fewer Action Points to use, while Energy Weapons deal more Base Damage at the cost of more Action Points. This isn't always the case, especially when dealing with custom Weapons.


; Hand-held Weapons
: All weapons that are not designated as mounted weapons are considered hand-held weapons. Hand-held weapons can be picked up, dropped, or thrown in various situations. When these weapons are destroyed, they do not damage the area they were located in. These are given the Tag [WN].


'''Take note of how the parts are separated by the blue lines. This shows how the Core Parts are divided into respective body parts (head, arm, arm, torso, leg, leg). Each individual part provides Defense to the entire Unit. We will come back to this later.'''
; Mounted Weapons
: These are the same as hand-held weapons except instead of being held by the Unit, they are mounted directly to it. Mounted weapons cannot be picked up or moved during a battle. These are given the Tag [MW].


=== Simple Assembly ===
=== Equipment ===
[WIP]
Similar to weapons, equipment is used to aid a Unit in combat. Equipment ranges from Radar to Drones and is mainly used as a utility for the Unit.


== Weapon/Equipment Parts==
; Attachments
At the bottom of the datasheet there is a section called '''"Weapons/Equipment Parts"''' with 8 open rows for your Unit's parts. On the top row of this section, similar to the Core Parts, you see '''Name''' and '''Notation''' but this time there are more columns:
: These are parts or a combination of parts that do not specifically fit into the other categories. Attachments are typically one-off parts that give the Unit a utility-based system. These are given the tag [AT]. When adding attachments to the parts collection section of the Weapon/Equipment Builder, it's important to pair up as many of the same parts to save on inventory space and increase the durability of the parts overall as most of these parts have low durability by themselves.


[[File:Blank weapons.PNG|link=|center|frame||Blank Weapons/Equipment List]]
; Shields
: These block incoming damage from an enemy. Typically they are large and cumbersome but can be used to block enemy fire or movement for more strategic planning. These are given the tag [SD]. Passively these can take the damage from a section they are held by or mounted to in order for that section to last a bit longer in combat.  When mounted to the Torso section, it may also protect the Head section. Actively, they can redirect all incoming damage using the Defensive Stance Command Action. See [[Core Rules#Command Actions | Command Actions]]


* '''Durability''' - How much damage the Weapon/Equipment can take before it is destroyed.  
; Thrusters
* '''Range''' - How far the Weapon can shoot.
: These aid the Unit by giving it the movement option of flight. If the total durability of all combined thrusters on the unit meets a specific requirement (see flight movement option) then the Unit can fly. These are given the tag [TH].  
* '''Base Damage (BD)''' - The amount of damage it will do in a single attack.
* '''Action Points (AP)''' - How many Action Points a player needs to perform a single attack.
* '''Type''' - If that Weapon is Kinetic or Energy Based.
* '''Systems''' - Special abilities that a single part can give to the Unit.


Located in the bottom row of this section is the combined total of each piece's stat contribution to show the overall Weapon/Equipment's stats.
: When adding thrusters to the Equipment list, it is important to group them by location strategically. If you choose to group all of your Thrusters into a single section, it will increase their durability, but doing so may make them a bigger target! Alternatively, you can split them up into separate sections to make them harder to hit at the cost of Inventory space.


* '''[Insert Name Here] | Total''' - Here you will give your weapon/equipment a name. If a weapon requires 2 hands to use, you will add the tag [2H] next to the name. Weapons made with any parts that have the [2H] tag in their description must be used with 2 hands.
: For example, the Alto Flight type has wings and thrusters connected to its torso. These will be broken down into two sections: a left-wing section and a right-wing section. Each section is made up of exactly the same parts so you only need to use the Weapon/Equipment Builder for this once. You will, however, need to add the two sections to the Inventory list so your Deployment Cost and Durability are accurately recorded on the Datasheet.
* '''[Dropdown box]''' - Directly to the right of the Name box (under the Notation column), you will indicate how many of that Weapon/Equipment you have including if you only have one. A number must occupy this box.
* '''Type''' - A Weapon's type is determined by the overall number of Kinetic type parts and Energy type parts that make up the Weapon. If there are 3 kinetic type parts and 1 energy type part, the Weapon will be Kinetic. If there are 2 energy types and 1 Kinetic type, then the Weapon will be Energy. If there is an equal number of each part type, then the type with the highest base damage will determine the Weapon's type.
* '''System''' - Each Weapon may only have 1 System attached to it. If there are multiple Systems available, you may choose one and type it in the space provided in the total row. If no Systems are available, leave it blank.


Just like with the Core Parts List, you need to type the Name and add the correct Notation. The sheet will auto-populate the stats if the two match the Name on the Parts List. Once all of the separate parts are added, the totals will be automatically calculated into the total row. This is the overall Weapon stats for each of the four stat types.
=== Weapon & Equipment Building ===
Located in the 30MMWar: Parts & Data (Online) Google document, there is a tab with the name '''Weapons & Equipment Builder'''. This is where you will do as the name suggests and build your weapons and equipment as well as give them stats that will then be transferred to your Units Datasheet.


=== Weapons ===
The sheet is divided into two sections: The Parts Calculator and the Stat Organizer. When you first open the sheet, you will only see the Stat Organizer. We will come back to this but for now, on the left-hand side you will see an arrow pointing towards a "+" sign. Click on this to expand the Parts Calculator Section.
In order to win the war, your Unit is going to need Weapons. Any Weapon you create can be used. Weapons are broken down into 2 categories: Ranged Combat Weapons & Close Combat. Each category has two types: '''Kinetic and Energy'''.  
 
On the top row, similar to the Unit Sections Calculator, you will see '''Name''' and '''Notation''' but this time there are more columns:
 
[[File:Part Calculator.png|center|750px]]
 
* '''Durability''' - How much defense each part has.
* '''Range''' - How far each part can attack.
* '''Base Damage''' - How much damage each part does.
* '''Action Points''' - How much AP each part costs to use.
* '''Type''' - If that part uses Kinetic or Energy based attacks. 
* '''System''' - What ability is attached to that part.
* '''Prerequisites''' - What requirements are associated with that part.
 
Once we have finished adding all of the parts to your weapon/equipment, click on the "-" sign in the upper left-hand side to collapse the Parts Calculator. Now we will be focusing on the Stat Organizer section. Starting from the top, you'll see two colors with a description next to them. These will indicate changes to your weapon based on the parts/SMTs you choose. Below those, there is a Blank Inventory Slot that will begin to autofill itself based on your weapon/equipment. When you have finished adding all of the stats you will take this information and transfer it to your Units Datasheet. Below that, you'll see 4 rows on the left side. Each row helps define how your weapon/equipment acts while in combat based on the parts you have chosen.
 
[[File:Stat Organizer.png|center|750px]]
 
* '''Category''' - Defines the general characteristic of your build. If a weapon category is selected, the option to make it a melee weapon will appear. You may select this along with the weapon category if it applies.
* '''Mechanism''' - Defines how a weapon fires. They are Systems that don't need to be added to a Units Datasheet. These will only appear if a weapon category has been selected and weapon parts were used in the build. If no mechanism is selected or available to a build in a weapon category it is a single fire weapon.
* '''Prerequisites''' - Defines restrictions to the build that the Unit must follow.
* '''Available Systems''' - Any Systems, other than the mechanism, that the Unit can choose to use given from the specific parts of the build. Any and all Systems taken must be added to the Units System Slots on its Datasheet.
 
On the right side, you'll see a blue box that says "Weapon Convert" Mod and a checkbox. If you have the appropriate mod, check the box and Slot will autofill in the correct information for you. Otherwise, leave this unchecked.


Once all of the correct parts have been added, the bottom row will show the weapons total stats. These stats will be transferred to the Weapon/Equipment Stats section of the Datasheet, which will be explained in another section.
Next, you'll see two red buttons labeled "Reset All" and "Reset Stats". When clicked, reset all will clear all information from the Stats Organizer and Parts Calculator sections. Reset stats will only reset the Stats Organizer section.


[[File:Weapons EX.PNG|link=|center|frame||[2H] Rail Cannon and stock SMG Weapon examples]]
Finally, on the bottom right you'll see the version number. Be sure you are using the most current version!


2-Handed Weapons: In the parts description on the Parts List, it will say if that specific part is 2-handed or not. When a part is labeled as 2-handed, the Unit using it must use two hands to properly wield it. If two hands are not used, the Weapon's total AP is raised by 3. This requirement doesn't affect mounted Weapons.
Once you have the total stats for your Weapon/Equipment, transfer this information to an available Inventory Slot on the Units Datasheet.


When physically building your Weapons, '''even if not every piece is used on the model itself, you will still add it to the list.'''
'''Additional Notes'''
==== Custom ====


==== Weapon Redundancy ====
The Name and Notation of each part need to match exactly as they do in the Parts List. If they don't, you will get an error. When the Name and Notation are correct, the Datasheet will auto-populate the parts' stats.
This is also explained in the [[Core Rules]] under section "5.3.4 - Weapons/Equipment."


When creating a Unit, you might have multiple copies of the same Weapon attached. This is called Weapon Redundancy or '''WR''' for short. A Weapon with multiple copies reduces its AP cost by 1 for every copy after the first, to a maximum reduction of 4 AP. A weapon cannot be reduced past half of its initial AP cost (rounded up). If the reduction would bring the AP cost to 2 or lower, the weapons AP cost is reduced to 2, and the damage is increased by 1 for every 2 copies of the same weapon available.
The next bullets are in reference to the Total Stat line of the weapon calculator:


<blockquote style="background-color: lightgrey; border: solid thin grey;">
* '''Type''' - Determined by the overall number of Kinetic / Energy type parts that make up the Weapon. If there are 3 Kinetic type parts and 1 Energy type part, the Weapon will be Kinetic. If there are 2 Energy types and 1 Kinetic type, then the Weapon will be Energy. If there is an equal number of each part type, then the type with the highest Base Damage will determine the Weapon's type.
* Ex1: 1 Missile Pod = 12Dmg & 6AP per shot | 4 Total Pods = 12Dmg & 3AP per shot
:: This means that if a player has 4 total missile pods on their Unit, a single attack will do 12Dmg/3AP instead of 12Dmg/6AP.
* Ex2: 1 Pistol = 3Dmg & 2AP per shot | 4 Total Pistols = 5Dmg & 2AP per shot
:: This means if a player has 4 total pistols on their Unit, a single attack will do 5Dmg/2AP instead of 3Dmg/2AP.
</blockquote>


When a Unit loses one of those Weapons in battle, they do not keep the same stats. WR only applies to how many Weapons that Unit has that are STILL in play. If we use the above examples:
*'''Tags''' - Depending on the parts that make up your Weapon, it may have multiple tags. All tag rules must be followed when using the weapon. See Tags in the Core Rules.
<blockquote style="background-color: lightgrey; border: solid thin grey;">
* Ex1: 4 Total Pods = 12Dmg & 3AP/shot | 2 are destroyed | 2 Total Pods = 12Dmg & 5 AP/shot
:: Since two were destroyed, the AP increases to 5.
* Ex2 4 Total Pistols = 5Dmg & 2 AP | 1 is destroyed | 3 Total Pistols = 4Dmg & 2 AP/shot
:: Since two were destroyed, the Damage is reduced by 2.
</blockquote>


This system is meant to be simple enough to make stat calculation changes in the middle of combat.
==== Manual Calculations ====
In the above section, all of the calculations for your weapons/equipment (damage, range, type, deployment cost, etc) have been done VIA the Excel sheet calculator. If you are unable to access this sheet for any reason, this section will go over how to do the calculations manually so you can still fill out a datasheet for your Units.


=== Equipment ===
To start, you will need to get the stats of all of the parts that make up your weapon or equipment. This can be done by looking them up in the Parts Search by kit name, part name, notation, Systems, tags, or defense value and writing them down.  
Similar to how Weapons are made, Equipment is created and added to the Datasheet.  


'''What would be considered Equipment?'''
Calculations to find the Range, Base Damage, AP, and Durability are added together and placed into an Inventory Slot on the Unit datasheet. If your weapon is a melee weapon, give it a range of 1 regardless of what the sum is.


Most parts will be labeled as Equipment in its description in the Parts List. The majority of these provide some kind of ability that may be added to your Unit to give it an advantage.  
Next, to find the Type, you need to compare all of your parts and see if there are more kinetic parts or energy parts. Whichever has the most is the overall weapons type. If there is an equal number of types, when you check to see which part has the highest base damage. The part with the highest base damage AND a type is the overall weapons type.


[[File:Equip EX.PNG|link=|center|frame||Equipment Example]]
To determine the Tags your weapon or equipment will have you need to determine a few things.  


==== Thrusters ====
When adding thrusters to the list, it is important to group them into a single section based on their location. For example, the Alto Flight type has wings and thrusters connected to its torso VIA the backpack unit (backpack units are considered part of the torso). These will be broken down into two sections: a left-wing section and a right-wing section. Each section is made up of exactly the same parts so you only have to fill out the section once. However, you do need to change the number in the box on the right side of the name from 1 to 2 to indicate that there are 2 wing Sections.


[[File:ALftequipEX.PNG|link=|center|frame||Alto Flight Type Wing Sections]]
Please note that even if you only have one piece that is considered Equipment (Smoke Discharger, Radar Dish, etc.), you still need to add it to this section.


Once you successfully add the pieces to the Equipment list, you can then add their total Durability to the Weapon/Equipment Stats section.
To calculate the overall Deployment Cost of the weapon, use this formula:


== Weapon & Equipment Stats ==
== Important Documents ==
There are 6 main sections on the Datasheet for your Unit. Each one is meant to organize the Abilities, Weapons, and Equipment you've made in the past sections for easy and quick access/alteration while in the middle of a battle. The 7th section shows Units' basic attacks.  
[https://docs.google.com/spreadsheets/d/17BZ1F7FpO5finnEYQVINvdjePFtv_WhdVBI6JZ_mXLk/edit#gid=1360820555 Datasheet Creation Document]


[WILL NEED TO REUPLOAD TABLE PICTURES UPDATED WITH 'BASE DAMAGE']
Datasheets are an essential part of the 30MM Wargame. With them you keep track of a Unit's current defense, how many hexes they can move, how much AP they have during their turn, and various other things.


[[File:Blank WE stats1.png|frame|center]]
[[Image:Datasheet v6.0.png|600px]]


* '''Weapons''' - All of the available Weapons your Unit can use. Each Weapon needs to be equipped in a hand (limited to one Weapon per hand) in order to use it. This is determined by its location. A Unit is also limited to carrying 3 non-equipped Weapons.
=== Blank Core Types ===
* '''Shields''' - All of the available Shields your Unit can use. Each Shield needs to be equipped in a hand (limited to one Shield per hand) in order to use it. A Unit is also limited to carrying 3 non-equipped Shields. [CONFIRM IF THIS IS 4 TOTAL OR 4 RESERVES]
Below are Blank Datasheets for Unit Core Types which correspond to the Chest Part of your Unit. If your Unit uses a Rabiot chest, then select the Rabiot Datasheet. If your Unit doesn't use a conventional Chest Part, then select the one that closely matches. A Unit Datasheet is a consumable item. This means that after every mission, a new one needs to be created.
* '''Mounted Weapons''' - Weapons that are permanently attached to a Unit and cannot be Swapped or picked up. Max of 10.
* '''Equipment''' - All of the available utility Equipment your Unit can use. Thrusters will also go into this table. Max of 10.
* '''Systems, Mods, and Traits''' - SMTs for short. Where all of the special Abilities that your Unit has gained are organized. Systems are gained from various parts while Mods and Traits are chosen during the pilot creation process. Max of 5 systems. Max Mods & Traits are based on Pilot Rank.
*'''Basic Attacks''' - As the name states. Used in the Close Combat Phase. [SHOULD REFERENCE THIS TERM SOMEWHERE IN CORE RULES.]


Just like with the Weapons/Equipment List, the top row of each section shows Name, Durability, Range, Base Damage, & AP with the exception of the SMTs and Basic Attacks sections.
'''Datasheets are currently unavailable while undergoing updates'''
*'''Location''' - Refers to where on your Unit that Weapon/Equipment is located.
*'''Type''' - Refers to the type of damage that Weapon deals: Kinetic or Energy. Specific Abilities require this information.
*'''Sys/Mod''' - The special Ability given to the Unit by the Weapon/Equipment it's using. The Sys/Mod is lost when the Weapon/Equipment is destroyed.


Under the SMTs Section, you will see the columns '''Type''' & '''Description''':  
[[Image:Coretype mech.png| 307px]]
*'''Type''' - This section has a drop-down menu with the categories: '''Armor, Movement, Utility, Drone Only,''' & '''Weapon'''. In the SMTs list, there will be a column that states which an SMT's type. Be sure to input the '''Name''' & '''Type''' exactly as it's written on the SMT list. If it's incorrect, the Deployment Cost of that SMT will not be added correctly.  
[[Image:Coretype vehicle.png| 307px]]
*'''Description''' - A simple section to add a description of what that SMT does. The space is limited, so it's recommended that you shorten each SMT's description.
[[Image:Coretype drone.png| 307px]]


=== W/E Stat Examples ===
==== Mech Units ====
[[File:ALFT-example1.png|frame|center| Alto Flight Type Wpn/Eqp Stats]]
<gallery mode="packed-hover" heights=200px>
Image:Alto.png|
Image:Portanova.png|
Image:Rabiot.png|
Image:Cielnova.png|
Image:Espossito.png|
Image:Revernova.png|
Image:Gardonova.png|
Image:Spinatia.png|
Image:Spinatio.png|
</gallery>


In the image above, you will see the Weapon/Equipment Stats of a standard Alto Flight Type. The out-of-the-box kit does not have any Weapons to put in the Weapons section or Shields to put in the Shields section, so we will just be looking at the sections that have information.
==== Vehicle Units ====
<gallery mode="packed-hover" heights=200px>
Image:Airfighter.png|link=https://drive.google.com/drive/folders/126owd-KGVfSQzCsjJPccJJxpx4ZdsBoA?usp=share_link
Image:Tank.png|link=https://drive.google.com/drive/folders/126owd-KGVfSQzCsjJPccJJxpx4ZdsBoA?usp=share_link
</gallery>


'''Remember: Your Unit cannot use Weapons that it doesn't have equipped or mounted, so it's recommended to begin the battle with the Weapon you want to use first in its hand(s) or mounted.'''
=== Pre-Made Datasheets ===


In the Equipment section, there are two Wing sections; Left Wing and Right Wing listed with "Torso" for the Location. This is because both Wing sections are connected to the Torso. Looking at the Mounted Weapons section, there are two Railguns. The Location column lists Left and Right Wing Sections because both Weapons are mounted to their respective wing section.


'''Keep in mind that if the area that a mounted Weapon is located on is destroyed, that Weapon is also destroyed!'''
In this case, if the Left Wing section is destroyed, the Railgun that was mounted to it is also destroyed even if the Weapon itself hasn't taken any damage. If a mounted Weapon is destroyed this way, it does not explode or cause damage to the Unit.


Under the SMTs section, this Unit has the Ability to Fly as a System despite the fact that neither one of the Wing sections have the Sys/Mod "Fly". This is because the Ability isn't given to the Unit because of one of the sections. Fly is granted because the total Thruster Durability (both Wing sections' Durability combined) has met the Fly System requirement.


== Core Stats ==
[[File:Core Stats - Blank EX.png|frame|float right|]]
[NEED TO CHANGE "STAT REDUCTION" LANGUAGE IN THIS IMAGE]
Alongside Weapon/Equipment Stats, you will determine a Unit's Defense with the help of this table. Starting from the top, you will see 3 columns:


*'''Name''' - Name of each individual section that makes up your Unit. Different Units are divided up into different sections. The examples below are generic Units and your build may have more/fewer sections.
**Mechs - Head | Torso | Left Arm | Right Arm | Left Leg | Right Leg
**Vehicles - Cockpit | Body | Left Section | Right Section
**Drones - Body


*'''Max Defense''' - The combined total Defense of each part that makes up that section.
*'''Current Defense''' - When playing, you will use this area to adjust each section's Defense as damage is taken.




*'''Pilot Name''' - The name of the pilot controlling that Unit.
*'''Pilot Rank/ A.I. Processor''' - Depending on the pilot's rank, the Unit receives bonuses. Higher ranks confer more bonuses but cost more to deploy. A.I. Processors are specifically for Drone Units and grant bonuses similar to ranks.




*'''Modifiers''' - This shows the different modifiers that can be gained based on rank/processor.
** Stat Modifier - The number of points that can be used to change a Unit's stats.
** Available Mods - The number of Mods a Unit can have.
** Available Traits - The number of Traits a pilot can have.




*'''Defense Total''' - The combined total Defense value of all the Core Parts only. Does not include Weapons/Equipment (which use Durability), ranks, or SMTs. This total determines a Unit's Classification.
*'''Thruster Durability Total''' - The combined total Durability value of all thrusters. Determines Fly/Swim systems.




*'''Core Type''' - Based on the chest piece of the Unit. Determines Base Stats.
*'''Classification''' - 1-5 based on Total Defense. Higher Defense gives a Unit a higher classification. Determines Standard Movement and Base AP.
*'''Base AP''' - How many Action Points a Unit starts each turn with.




*'''Standard Movement''' - How far a Unit can move during its turn.
*'''Thruster Movement''' - Doubles the Standard Movement at the cost of forfeiting the Ranged Combat and Close Combat Phases.




*'''Base Stats''' - The bare minimum Stats that individual Units start with.
*'''Modified Stats''' - Base Stats that have been altered due to Rank, Mods, or Traits. If there are no changes, then enter the Base Stats here again. When playing, these will be the Stats you reference. Not the Base Stats column.




*'''Deployment Cost''' - The combined total value of a Unit's Deployment Cost including Defense, Weapons, Equipment, SMT's, & Pilot Rank. Specific missions will call for a maximum or minimum DC.
*'''Version''' - Shows the version number of the Datasheet. Be sure you have the most up-to-date version prior to creating a sheet!


=== Core Section Examples ===
The image below shows what a standard out-of-the-box Portanova Unit's Core Stats look like. [IMAGE NEEDS TO REFLECT CHANGING LANGUAGE FOR 'STAT REDUCTION' AS WELL]
[[File:Core Stats - Portanova EX.png|frame|left|]]
<br></br>
Starting from the top; You will see that the Unit is broken down into 6 sections. Each of those sections has a value based on the Core Parts section. Every part that makes up a section has its Defense added together and put in the Max Defense column. While playing, the Current Defense column is where any changes to that section's Max Defense will be recorded. '''Please note:''' this area won't always look like this. Custom Units may have more than two arms, legs, heads, etc. so it's important for the player to decide the best way to divide up their Unit.
<br></br>
For the Pilot Rank/A.I. Processor, we see that this Pilot's rank is 4. This means that the Unit gains more Modifiers at a higher Deployment Cost. We will come back to this.


Total defense is automatically calculated from your Core Parts List. Here, the Thruster Durability Total is 0. This is because this Unit does not have any Thrusters.


For its Core Type, the Unit is a Portanova. As stated before, Core Types are based on the Torso Part of the Unit. Players must choose the correct Core Type for their Units. Classifications are based on a Unit's Total Defense, while Base AP is based on a Unit's Classification. Both of these calculations are done automatically. If you are using the printed Datasheet, you will find all of the information needed to do these manually paired with the sheet.


Standard Movement is also based on a Unit's Classification. Thruster Movement, however, is based on whether the Unit has any Thrusters located in its Equipment section or not. With Thrusters, this value will be double the Unit's Standard Movement value. If the Unit doesn't have any Thrusters, then this will indicate a N/A.


Base Stats are generated by Core Type. These are generated automatically and are the highest each Stat can be ('''Remember:''' The higher the number, the worse the Stat is). Here you see that the Base Stats are 7/9/7. Modified Stats are a Unit's Base Stats AFTER the player has factored in changes from the Modifiers section. In the Modifiers section, the Pilot Rank grants 3 stat reductions. This means that we have 3 points to [ADD/SUBTRACT TO/FROM] any of the Unit's Stats. On this Datasheet, the player decided that the Unit is going to be well-rounded in Accuracy and Assault, but there is no change to its Evasion. [THIS SECTION ALSO APPEARS TO NEED UPDATED TO REFLECT STAT REDUCTION TERMINOLOGY]
</br>








{{CoreNavigation}}




[[Category:Rules]]
[[Category:Rules]]

Latest revision as of 15:01, 28 March 2024

Datasheet Breakdown

Current Datasheet Version: 6.0

Future Datasheet Version: 6.1 & 6.1t (TBD)

Once your Model is complete and ready for battle, open up the blank Datasheet that corresponds to your Unit's Core Type. This can be found by determining what kit the Unit's chest piece came from. If the chest piece is from the Alto kit, then the Core Type will be Alto. If the chest piece is from the Revernova kit, then the Core Type will be Revernova. If you have multiple chest pieces on your unit OR none at all, you may pick one that best fits your Unit.

Once you have downloaded the correct datasheet, you will need to document all of your Unit Sections, Weapons, Mounted Weapons, Equipment, Shields, Systems, and Mods. It may look like a lot but we will break everything down into segments.

Before we get into how to create a Datasheet, we will first identify each area on the Datasheet itself.

Datasheet Visual.png
  1. Unit Sections - Each Unit is made up of different sections. Each section has a max defense and current defense. The max defense is the maximum amount of damage that section can withstand before being destroyed. The current defense is a blank area that should be used when damage is taken but the section remains intact. The remaining defense value should be written here. At the bottom is Total Defense. All Unit Sections will combine their Max Def. and the value will be written here. This value is the base Deployment Cost of your Unit without any weapons, pilots, or SMTs.
  2. Specifications - This shows the Units Classification, Base Action Points, Standard Movement, and Thruster Movement. Classification is based on the Units' Total Defense value and determines Base AP and Standard Movement. The classification chart can be found here under the classification section. Base AP is how many Action Points a Unit has before they make an AP Roll* during gameplay. Standard Movement shows the maximum amount of hexes a Unit can move during its turn. Thruster Movement is only available for Units with thrusters. Thruster Durability is the combined durability of all of the Units thrusters. This is to show which standard movement options that Unit can use.
  3. Modified Stats - This shows Accuracy, Assault, & Evasion stats. Accuracy is for long-ranged targets. Assault is for close-range targets, and evasion is for evading incoming attacks.
    Each one has a base stat value under the larger modified value. Base stats derive from the Core Type. The modified stat references the base stat AFTER it's been modified by the player. Depending on the pilot's rank, the player gets Stat Reduction Modifiers (SRM for short). These points allow the Units base stats to be lowered to better fit the players' play style. The lowest modified stats can be is 2 for each stat (or 2/2/2) and the highest cannot go past their original base stats. Systems, Mods, and Traits can also modify stats.
  4. Core Type - Determines the base stats of the Unit. These can be found inside the modified stats section. Core type is determined by what chest piece is used in the creation of the mech. Each Core Type has different stats. They are represented by an image in this box.
  5. Unit Information - This is the name and type of unit. The type of unit will determine it's primary movement.
  6. Pilot Information - This is the name, Rank, and cost of the Pilot. The Pilot determines how many Mods, Traits, and Stat Reduction Modifiers (SRM) the unit has.
  7. Systems, Mods, & Traits - These are special abilities and bonuses that a player can use the further customize their Unit. Systems become available for a Unit based on what they have physically on the model. The maximum amount of Systems a Unit can use at one time is 5, so choose wisely! If you have weapons that have the same Systems, you only need to add it to a single System slot. Mods and Traits are non-physical abilities/bonuses based on various factors. The amount of Mods and Traits a player can use is limited by the pilot's rank.
  8. Weapons & Equipment Inventory - This is where all of the Units' weapons, mounted weapons, thrusters, Shields, and equipment are identified. Along the top, you will see 9 columns. These columns identify the specifics of each weapon.
    At the bottom of the inventory, you will also see Total Thruster Durability and Total Inventory DC. If a Unit has thrusters, you would combine all of their durability here. As for the Total Inventory DC, you simply combine the DC of everything in your inventory and put the value in the dedicated area.
    • Name - What you call the weapon.
    • Tags - Category, requirements, and/or bonuses for the weapon.
    • Location - Where the weapon is located on the Unit. Head, Torso, Left Arm, ETC.
    • Range - How many hexes the weapon can fire from.
    • Base Damage - How much damage, per shot, the weapon does.
    • AP (Action Points) - How much AP it costs to fire the weapon once.
    • Type - Dictates if the weapon fires projectiles or pure energy.
    • Durability - How much defense the weapon has until it is destroyed.
    • DC (Deployment Cost) - How much it costs for the Unit to field the weapon.
  9. Deployment Cost - This is the total cost to field this Unit. This is the combined sum of the Units' Total Defense, Systems DC, Total Inventory DC, and Pilot Rank DC.

Unit Sections

Unit Sections.png

Each individual piece that makes up the Unit is considered a part. When you combine parts into limbs, heads, torsos, etc, these are called Unit Sections.

First, you must identify how many Unit Sections your Unit has and what each one is. Most Mech Units have a Head, Left Arm, Right Arm, Torso, Left Leg, and Right Leg as Unit Sections. Vehicles on the other hand have a Cockpit and at least one drive section. More information can be found in the Unit Types section of the Core Rules.

Once you have listed each of your Unit's Unit Sections, you will then need to determine the Max Defense of each one. To do this, you will need to open up the Parts & Data sheet. There is a tab with the name Parts Search. Here you can locate the stats for each part of your Unit by part name, kit name, or various other things. Once you are familiar with that, move to the Core Section Calculator tab. Here is where you will add the Name and Notation of each part that makes up a single Core Section. You don't need to use the calculator if you are already familiar with the process but it is recommended as it will get you familiar with the process of using our calculators.

Unit Section Calculator

Unit Section Calculator.png

On the top, you will see 3 titles: Name, Notation, and Defense. In the Name column, you will put down the name of the specific part listed on your Unit's model. Most parts share the same names, so in order to differentiate which part belongs to which model, we use specific model Notations.

Notations are broken down into what packs they come from and which unit they belong to. For example, PN-15 is the PortaNova-15. The Weapons Pack 1 for the Portanova is W1-15. Similarly, the Alto-17 is AL-17. The Weapons Pack for Alto is W1-17.

The Defense values are determined by which Unit is being used and what its purpose is. In this column, this is done automatically once the Name and Notation are added. The Defense value will only populate if the Name and Notation match exactly! If a value fails to auto-populate, check the spelling. If it still does not work, notify a Developer on the Discord then type the value in yourself.

You may have noticed that there are multiple parts of the same name. This is because most Units are symmetrical and use the same parts for both sides of the Unit- two arms and two legs. This organizational system helps with the design of asymmetrical Units.


Sections and Parts.png

The image on the above is an example of what a standard out-of-the-box Portanova-15 looks like when each piece is broken down and added to the Core Section List.

Torso & Cockpit Stats

The Torso and Cockpits, or Pilot Sections, give base stats for the unit which can be improved when adding a Pilot. Each Pilot Section has varying stats and may be chosen even if the unit does not visibly use that section. The stats can be found in the Parts and Datasheet, linked below.

Pilot Creation

  1. Name - Give your Pilot a name.
  2. Rank - Give your Pilot a Rank/Artificial Intelligence.
    • Use the chart and fill in the appropriate field.
      PilotRankChart.png
    • The Higher the rank, the more bonuses you receive - however, you will pay a higher Deployment Cost
    • Ranks range from 1-5.
    • A.I.s range from Simple to Intermediate to Advanced.
  3. Determine Stats - Stats determine how well a Unit can fight.
    • Once a Rank/AI has been chosen, fill in the Stat Reduction Modifiers (S.R.M.), Available Mods, and Available Traits.
    • Stats are listed on the right side of each Rank/A.I. level on the Pilot ID chart.
  4. 'Choose your Pilot's Traits - Traits are stronger than average Abilities
    • The number of Available Traits is based on Rank.
    • The complete list of Pilot Traits can be found on the Parts List below.
  5. Determine your Pilot's Deployment Cost
    • The far-right column labeled as "DC" is the Rank/A.I.'s corresponding Deployment Cost.
    • Write that number down in the upper right area.

Your newly created Pilot is ready to be paired up with a Unit!


Weapons & Equipment

If you want to win a war, you need weapons and equipment. These are the primary ways you will be able to subjugate and destroy your opponents. In this section, you will learn about the various weapons and equipments as well as how to properly create them and add them to your Units datasheet.

Tags

Before you can fully understand how the 30MM: Wargame allows a player to build almost any weapon they want, you must first understand how Tags work. Tags are a way to specify, at a glance, what ability correlates to what weapon/equipment and how it functions in the game. Tags are represented by two letters, numbers, or a combination of the two inside of brackets. For example, the category Hand-Held Weapon is represented by the tag [WN]. When you look at a Units datasheet and see a weapon in the inventory with the tag [WN], you will know that it's a hand-held weapon. Combining multiple tags to customize your weapons or equipment is a basic operation that you will get more familiar with as you build your datasheets.

Multiple tags are arranged in sequential order. The first 3 tags identify the function while the proceeding tags identify any abilities it might give a Unit. Below is the order each tag will be in along with the various different tags in each.

  1. Category
    • [WN] Hand-Held Weapon
    • [MW] Mounted Weapon
    • [EQ] Attachment
    • [SD] Shield
    • [TH] Thruster
  2. Mechanism
    • [MG] Full Auto
    • [GB] 2For1
    • [SG] Spread Shot
    • [EO] Splash Damage
    • [MH] Multihit
    • [OC] Overcharge
  3. Prerequisites
    • [2H] Two-Handed - A Unit must have, at least, 2 hands available in order to use this weapon. If they do not, then +5 AP cost will be added to the weapon.
    • [RC] Recharge - After firing the weapon once, place a recharge token down. The unit is unable to fire again until its next 2 activations.
  4. Available Systems
    • Check the Google Document to view current and up-to-date Systems on the page Abilities.

For example, the tags [WN][MG][2H] identify a two-handed weapon with the System "Full Auto". The tags [MW][EO] identify a mounted weapon with the System "Splash Damage".

Weapons

Weapons are broken down into 2 categories:

  • Ranged Weapons
  • Melee Weapons

Ranged Weapons can engage targets beyond 1 hex. Melee Weapons can only engage targets from a single hex distance. Unless otherwise stated, all Weapons with a range of 1 are Melee Weapons. Both categories can be further broken down into 2 types: Kinetic and Energy. Generally speaking, Kinetic Weapons deal less Base Damage but also require fewer Action Points to use, while Energy Weapons deal more Base Damage at the cost of more Action Points. This isn't always the case, especially when dealing with custom Weapons.

Hand-held Weapons
All weapons that are not designated as mounted weapons are considered hand-held weapons. Hand-held weapons can be picked up, dropped, or thrown in various situations. When these weapons are destroyed, they do not damage the area they were located in. These are given the Tag [WN].
Mounted Weapons
These are the same as hand-held weapons except instead of being held by the Unit, they are mounted directly to it. Mounted weapons cannot be picked up or moved during a battle. These are given the Tag [MW].

Equipment

Similar to weapons, equipment is used to aid a Unit in combat. Equipment ranges from Radar to Drones and is mainly used as a utility for the Unit.

Attachments
These are parts or a combination of parts that do not specifically fit into the other categories. Attachments are typically one-off parts that give the Unit a utility-based system. These are given the tag [AT]. When adding attachments to the parts collection section of the Weapon/Equipment Builder, it's important to pair up as many of the same parts to save on inventory space and increase the durability of the parts overall as most of these parts have low durability by themselves.
Shields
These block incoming damage from an enemy. Typically they are large and cumbersome but can be used to block enemy fire or movement for more strategic planning. These are given the tag [SD]. Passively these can take the damage from a section they are held by or mounted to in order for that section to last a bit longer in combat. When mounted to the Torso section, it may also protect the Head section. Actively, they can redirect all incoming damage using the Defensive Stance Command Action. See Command Actions
Thrusters
These aid the Unit by giving it the movement option of flight. If the total durability of all combined thrusters on the unit meets a specific requirement (see flight movement option) then the Unit can fly. These are given the tag [TH].
When adding thrusters to the Equipment list, it is important to group them by location strategically. If you choose to group all of your Thrusters into a single section, it will increase their durability, but doing so may make them a bigger target! Alternatively, you can split them up into separate sections to make them harder to hit at the cost of Inventory space.
For example, the Alto Flight type has wings and thrusters connected to its torso. These will be broken down into two sections: a left-wing section and a right-wing section. Each section is made up of exactly the same parts so you only need to use the Weapon/Equipment Builder for this once. You will, however, need to add the two sections to the Inventory list so your Deployment Cost and Durability are accurately recorded on the Datasheet.

Weapon & Equipment Building

Located in the 30MMWar: Parts & Data (Online) Google document, there is a tab with the name Weapons & Equipment Builder. This is where you will do as the name suggests and build your weapons and equipment as well as give them stats that will then be transferred to your Units Datasheet.

The sheet is divided into two sections: The Parts Calculator and the Stat Organizer. When you first open the sheet, you will only see the Stat Organizer. We will come back to this but for now, on the left-hand side you will see an arrow pointing towards a "+" sign. Click on this to expand the Parts Calculator Section.

On the top row, similar to the Unit Sections Calculator, you will see Name and Notation but this time there are more columns:

Part Calculator.png
  • Durability - How much defense each part has.
  • Range - How far each part can attack.
  • Base Damage - How much damage each part does.
  • Action Points - How much AP each part costs to use.
  • Type - If that part uses Kinetic or Energy based attacks.
  • System - What ability is attached to that part.
  • Prerequisites - What requirements are associated with that part.

Once we have finished adding all of the parts to your weapon/equipment, click on the "-" sign in the upper left-hand side to collapse the Parts Calculator. Now we will be focusing on the Stat Organizer section. Starting from the top, you'll see two colors with a description next to them. These will indicate changes to your weapon based on the parts/SMTs you choose. Below those, there is a Blank Inventory Slot that will begin to autofill itself based on your weapon/equipment. When you have finished adding all of the stats you will take this information and transfer it to your Units Datasheet. Below that, you'll see 4 rows on the left side. Each row helps define how your weapon/equipment acts while in combat based on the parts you have chosen.

Stat Organizer.png
  • Category - Defines the general characteristic of your build. If a weapon category is selected, the option to make it a melee weapon will appear. You may select this along with the weapon category if it applies.
  • Mechanism - Defines how a weapon fires. They are Systems that don't need to be added to a Units Datasheet. These will only appear if a weapon category has been selected and weapon parts were used in the build. If no mechanism is selected or available to a build in a weapon category it is a single fire weapon.
  • Prerequisites - Defines restrictions to the build that the Unit must follow.
  • Available Systems - Any Systems, other than the mechanism, that the Unit can choose to use given from the specific parts of the build. Any and all Systems taken must be added to the Units System Slots on its Datasheet.

On the right side, you'll see a blue box that says "Weapon Convert" Mod and a checkbox. If you have the appropriate mod, check the box and Slot will autofill in the correct information for you. Otherwise, leave this unchecked.

Next, you'll see two red buttons labeled "Reset All" and "Reset Stats". When clicked, reset all will clear all information from the Stats Organizer and Parts Calculator sections. Reset stats will only reset the Stats Organizer section.

Finally, on the bottom right you'll see the version number. Be sure you are using the most current version!

Once you have the total stats for your Weapon/Equipment, transfer this information to an available Inventory Slot on the Units Datasheet.

Additional Notes

The Name and Notation of each part need to match exactly as they do in the Parts List. If they don't, you will get an error. When the Name and Notation are correct, the Datasheet will auto-populate the parts' stats.

The next bullets are in reference to the Total Stat line of the weapon calculator:

  • Type - Determined by the overall number of Kinetic / Energy type parts that make up the Weapon. If there are 3 Kinetic type parts and 1 Energy type part, the Weapon will be Kinetic. If there are 2 Energy types and 1 Kinetic type, then the Weapon will be Energy. If there is an equal number of each part type, then the type with the highest Base Damage will determine the Weapon's type.
  • Tags - Depending on the parts that make up your Weapon, it may have multiple tags. All tag rules must be followed when using the weapon. See Tags in the Core Rules.

Manual Calculations

In the above section, all of the calculations for your weapons/equipment (damage, range, type, deployment cost, etc) have been done VIA the Excel sheet calculator. If you are unable to access this sheet for any reason, this section will go over how to do the calculations manually so you can still fill out a datasheet for your Units.

To start, you will need to get the stats of all of the parts that make up your weapon or equipment. This can be done by looking them up in the Parts Search by kit name, part name, notation, Systems, tags, or defense value and writing them down.

Calculations to find the Range, Base Damage, AP, and Durability are added together and placed into an Inventory Slot on the Unit datasheet. If your weapon is a melee weapon, give it a range of 1 regardless of what the sum is.

Next, to find the Type, you need to compare all of your parts and see if there are more kinetic parts or energy parts. Whichever has the most is the overall weapons type. If there is an equal number of types, when you check to see which part has the highest base damage. The part with the highest base damage AND a type is the overall weapons type.

To determine the Tags your weapon or equipment will have you need to determine a few things.


To calculate the overall Deployment Cost of the weapon, use this formula:

Important Documents

Datasheet Creation Document

Datasheets are an essential part of the 30MM Wargame. With them you keep track of a Unit's current defense, how many hexes they can move, how much AP they have during their turn, and various other things.

Datasheet v6.0.png

Blank Core Types

Below are Blank Datasheets for Unit Core Types which correspond to the Chest Part of your Unit. If your Unit uses a Rabiot chest, then select the Rabiot Datasheet. If your Unit doesn't use a conventional Chest Part, then select the one that closely matches. A Unit Datasheet is a consumable item. This means that after every mission, a new one needs to be created.

Datasheets are currently unavailable while undergoing updates

Coretype mech.png Coretype vehicle.png Coretype drone.png

Mech Units

Vehicle Units

Pre-Made Datasheets





Core Rules
Core Rules | Datasheets | Unit Datasheet Creation | Abilities