Difference between revisions of "Core Rules"

From 30 Minute Missions: Wargame
 
(160 intermediate revisions by 3 users not shown)
Line 1: Line 1:
== Introduction ==
== Introduction ==
The 30 Minute Missions: Wargame is an asymmetrical wargame played by 2+ players with an Attacker team and Defender team. The game can be played by any number of players but must remain in the Attacker and Defender style unless otherwise stated. Teams do not have to have the same number of players.
The 30 Minute Missions: Wargame is an asymmetrical wargame played by 2+ players with an Attacker team and Defender team. The game can be played by any number of players but must remain in the Attacker and Defender style unless otherwise stated. Teams do not have to have the same number of players.


You can play alone similar to how one would play themselves in chess, but it is not recommended.
You can play alone similar to how one would play themselves in chess, but it is not recommended.
== Combat Objective ==
The game is won after the main objective of the mission you are playing has been completed. These range from holding an objective for multiple turns or getting an object and moving to your side of the board.


== Required Components ==
== Required Components ==


=== Dice ===
=== Dice ===
It is recommended that you have at least 10 eight-sided dice (D8) so you can roll all of your attacks at once instead of one at a time. It is also advised that you have a few D20s on hand to use to keep track of how many Action Points a Unit has.
It is recommended that you have at least 1 eight-sided dice (D8), but having multiple will make it so you can roll all of your attacks at once instead of one at a time. It is also advised that you have a twenty-sided dice (D20) on hand for each unit to use to keep track of how many Action Points a Unit has, however a piece of paper will do as well.


If a rule requires a D8 roll 3 or higher, this is often abbreviated as 3+.
If a rule requires a D8 roll 3 or higher, this is often abbreviated as 3+.
Line 13: Line 18:
=== Objective Markers ===
=== Objective Markers ===


[WIP]
Objective Markers can be anything as long as they fit on a hex and do not interfere with the movement of most units. There will be cases where a unit takes up a whole hex or will otherwise cause an issue with the token. In those cases make a mark of where the token was on a piece of paper or other notation.


=== Tokens ===
=== Tokens ===
While playing the game, you may need various tokens to identify a status effect or elevation. a Printable sheet will be available soon.
While playing the game, you may need various tokens to identify a status effect or elevation.


<gallery widths=150px >
=== Units ===
Image:Active.png| Active
Described in greater detail later. Units mean the 1/144 scale models built using 30mm Parts. Other models in the same scale may be used as well. We suggest a minimum of 1 unit per person playing. However without a points balance this may skew combat in favor of one player over the other.
Image:In-Active.png| Inactive
 
Image:Stuck.png| Stuck
=== Datasheet ===
</gallery>
The Datasheet contains your unit's information. Defense, Weapons, and other special abilities will all be listed here. More information is found on the [[Unit Datasheet Creation]] page.


== Unit Information ==
== Unit Information ==


=== Squads ===
Units are the giant robots (mechs) and vehicles used and while any thing can be used the game is designed with primarily with 30 Minute Mission parts in mind
{| class="wikitable" style="text-align:center; vertical-align:middle; background-color:#F8F9FA; color:#202122; float:right; margin-left:25px;"
.
|- style="font-weight:bold;"
=== Unit Sections ===
! Engagement Size
 
! Deployment Cost Limit
When a player is creating their Unit, they need to determine its Unit Sections. Unit Sections (US) are groups of individual parts combined to form specific areas that perform a certain function. First, a player needs to determine what type of Unit they created. Whether it be a Mech or a Vehicle each type has different Unit Sections available to it with many being used by the other types. Drones, which may be a Mech Unit, Vehicle Unit, or Equipment, may also require some of these Sections depending on build. Determine what Sections are needed for your Unit type by their movement requirements.
|-
[[File:CS-Units.png| frameless | right| 500px | Battlefield Layout]]
| Scouting
'''Unit Sections:'''
| 600
* Head - The upper part of a Mech Units body. Contains complex camera systems to provide visuals to the pilot in real-time.
|-
* AI Cockpit - Main Section of a Drone/Mech/Vehicle. Contains the A.I. pilot.
| Skirmish
* Torso - Main Section of a Mech Unit. Holds the pilot.
| 1200
* Cockpit - Main Section of a Vehicle. Holds the pilot.
|-
* Arm - The upper limb of a Mech Unit. Has the ability to pick up/hold/carry various things.
| Operation
* Tail - A modified arm, usually used for stability and aesthetics. May have weapons or thrusters attached to it.
| 1800
* Leg - Each of the limbs on a Unit that provides movement.
|-
* Aquatic Drive - A section that provides movement in Water and Deep Water Tiles. Requires for Aquatic vehicles.
| Conflagration
* Aerial Drive - A Section that provides flight in some form either for hovering or actual flight. It is a requirement for Aerial Vehicles.
| 2500
* Terra Drive - A Section that provides movement across the ground. It grants standard movement and is a requirement for Terrestrial Vehicles.
|}
 
Each player controls a squad of 30MM Models. The number of Units you can have in your squad during an Engagement is determined by the Deployment Cost Limit of the Mission and the Deployment Cost of the Units you want to bring. You can bring any combination of Units to an Engagement so long as their combined Deployment Cost is lower than the Deployment Cost Limit listed for the Engagement.
Next, Identify how many Sections your Unit has and what each one is. Mech Units normally have a head, two arms, two legs, as well as a Torso. Vehicle Units normally have at least one Drive Section and a Cockpit. Drones normally have a single AI Cockpit Section. All of these may vary depending on how you build your Units.


=== Unit Types ===
=== Unit Types ===
Units are divided into the following Types:
Units are divided into the following Types:


<tabs>
==== Mech ====
<tab name=Mech>
A unit that meets any of the following guidelines:
A unit that meets any of the following guidelines:


Line 58: Line 62:


This is the standard Engagement Unit.
This is the standard Engagement Unit.
</tab>


<tab name=Vehicle>
==== Vehicle ====
Any Unit that relies on jet propulsion, wheels, tracks/treads, or rotors as its primary source of movement and doesn't have any form of arms. Vehicles are represented by the Core Types below, each with a unique set of rules.
Any Unit that relies on jet propulsion, wheels, tracks/treads, or rotors as its primary source of movement and doesn't have any form of arms. Any part that isn't part of a Drive Core Section, weapon, or equipment is considered part of the Cockpit Core Section.  


All Vehicle types gain the following changes to gameplay:
All Vehicle types gain the following changes to their gameplay:
* When checking line of sight (LoS), the reference point is the hex as close as possible to where the pilot is located.
* Must have a Cockpit Unit Section in place of a Torso Unit Section.
* When checking line of sight (LoS), the reference point starts at the Units cockpit.
* Cannot physically pick up or interact with any objects.
* Cannot physically pick up or interact with any objects.
* Cannot change elevation [+/-] without appropriate Abilities.
* Cannot change elevation [+/-] without appropriate Abilities.
* Cannot obtain the Jump Ability.
* Cannot obtain the Jump Ability.
* Each Vehicle Core Type will have a minimum number of Core Sections determined by its specific model.


<h4>EXA Tank</h4>
Vehicles are broken down into 3 categories: Terrestrial, Aerial, and Aquatic. Each one has specific requirements that must be met in order for a vehicle to be considered one or the other. Below is each category along with its Requirements, Restrictions, and Bonuses.
* Field of View is the entire 6 hexes around the vehicle instead of the 3 hexes in front of the Unit.
 
* Costs twice as many Movement Points to cross green hexes.  
<div class="toccolours mw-collapsible mw-collapsed" style="width:97%; padding:0.5em">
<h4>EXA Air Fighter</h4>
<div style="font-weight:bold;line-height:1.6;">Terrestrial</div>
* Must use all of its Movement Points (standard or thruster) in a single turn.
<div class="mw-collapsible-content">
<h4>EXA Attack Sub</h4>
Land-based vehicles.  
* When attacking with Missile Pods or Rocket Launchers, no Field of View is needed. [IS THIS SUPPOSED TO READ LOS?]
* Can only move over Light Blue or Dark Blue hexes.
<h4>EXA Space Craft</h4>


</tab>
Any Unit that meets the following requirements are to be regarded as a Terrestrial Vehicle Unit:
* Must contain at least two Terra Drive Unit Sections.
* Does not contain Flight Drive Unit Sections.
* Does not contain Aquatic Drive Unit Sections.


<tab name=Drone>
The following are restrictions that a Terrestrial Unit must follow:
Drones are typically smaller units or equipment controlled by a larger or more networked unit.
* Weapon range is halved when firing through green hexes.
* Movement costs 2x when traveling over green hexes.


'''Drone Units:'''
The following bonuses are given to Terrestrial Vehicles:
* FoV is all 6 hexes around the Unit (360 degrees).
* Main Cannon has an AP reduction of 3 (to a minimum of 4).


AI Piloted Units may be made into Drones when a Main Unit takes the Control Management Mod and the AI Piloted Unit takes the Drone Agent Mod. Drone Units act as normal Units but gain the option to move during the parent Units turn.
</div></div>


'''Drone Equipment:'''
<div class="toccolours mw-collapsible mw-collapsed" style="width:97%; padding:0.5em">
<div style="font-weight:bold;line-height:1.6;">Aerial</div>
<div class="mw-collapsible-content">
Usually a plane, helicopter, or other vehicle for flying in appearance.


Equipment can be made into Drones when the parent Unit takes the Control Management Mod.
Any Unit that meets the following requirements are to be regarded as an Aerial Vehicle Unit:
* Must contain at least one Flight Core Part
* Does not contain Aquatic Drive Unit Sections.
* Does not contain Terra Drive Unit Sections.


If the drones has flying parts, give them the Drone Flight [DF] tag. If they have leg parts, give them the Drone Land [DL] tag. If they have swimming parts, give them the Drone Swim [DS] tag. Drones with these tags move with the Main Unit and must stay within 1 hex distance. These drones can move to various positions around the Main Unit via command actions. Otherwise they keep in formation around the Main Unit. All drones share the same stats as the parent Unit.
The following are restrictions that an Aerial Unit must follow:
* Cannot move on 0 Elevation (Ground Level).
* Can only use thruster movement.
* All movement points must be used during activation. Failure to do so will result in Unit taking fall damage to Cockpit Unit Section.
* Standard movement is an exclusive Command Action that can only be gained with the use of rotor parts.


If you have a drone that acts as a sentry turret, give it the Drone Turret [DT] tag. These drones are not mobile and once placed can only change direction, VIA command action, if the parent unit is within a 1 hex radius. These types of drones cannot evade incoming attacks.
The following bonuses are given to Aerial Vehicles:
Strafing runs: When the unit passes directly over enemy units (a single elevation directly above) during the movement phase, it may pause its movement and conduct a single ranged combat or close combat attack. After the attack has been resolved, the unit can continue with its movement phase. This can be repeated.


</div></div>
</div></div>


</tab>
<div class="toccolours mw-collapsible mw-collapsed" style="width:97%; padding:0.5em">
<div style="font-weight:bold;line-height:1.6;">Aquatic</div>
<div class="mw-collapsible-content">
Usually a boat, submarine, or other vehicle for navigating the water.


</tabs>
Any Unit that meets the following requirements are to be regarded as an Aquatic Vehicle Unit: 
* Must contain at least one Aquatic Drive Unit Section.
* Must not contain Terra Drive Unit Sections.
* Must not contain Aerial Drive Unit Sections.
 
The following are restrictions that an Aquatic Unit must follow:
* Can only move over light/dark blue hexes.
 
The following bonuses are given to Aquatic Vehicles:
* Attacks made with missile pods don't need LoS.
 
</div></div>
 
==== Drone ====
Drones are typically smaller units or equipment controlled by a larger or more networked unit. Drones can be either mechs OR vehicles.
 
There are two categories of Drones:
 
* A.I. Drones
* Non-AI Drones
 
'''A.I. Drones:'''
 
AI Drones are drones that are controlled by artificial intelligence. These are considered their own Units and as such, get their own Datasheet. The pilot for this Unit must be an AI and can be selected when choosing the rank/AI.
 
'''Non-A.I. Drones:'''
 
Non-AI Drones are drones that need to be controlled by a Main Unit with the Control Management Mod.
 
</div></div>


=== Classification ===
=== Classification ===
Line 138: Line 187:
There are 5 different classifications that provide different starting bonuses and limitations based on the size of your Unit. This is determined by the Total Defense value of all of Core Parts combined.
There are 5 different classifications that provide different starting bonuses and limitations based on the size of your Unit. This is determined by the Total Defense value of all of Core Parts combined.
<br clear=all>
<br clear=all>
=== Squads ===
Are groups of units usually no more than 5 as a game of 6 or more can become longer and slow down the game. These are generally called Lances or Fire Teams depending on size and your own preferences.


== Datasheets & Pilot IDs ==
== Datasheets ==
Datasheets and Pilot IDs show detailed stats and abilities for each Unit. You will need to create a Datasheet and Pilot ID for every Unit in your Squad. These can be found in the [[Datasheets | Datasheets / ID's]] page along with premade stock kit sheets.  
Datasheets show detailed stats and abilities for each Unit. You will need to create a Datasheet for every Unit in your Squad. Which instructions for can be found [[Unit Datasheet Creation]].


=== Parts List ===
== Gameplay ==
Below is a cataloged spreadsheet of most currently released 30MM kits. Players will add relevant information from the parts they use to build their Units onto each Unit's Datasheet. The list does not include things like joint parts on the OJ1 Runner or any part included on the J1 Runner. Images will be added to every part in the future. Download the spreadsheet to your Google Drive so you may input your own information! ''Click on the image to view.''
[[File:New Board 1.png| frameless | right| 500px | Battlefield Layout]]
=== Board Setup ===
All Missions take place on a battlefield overlayed by a hexagonal grid. [https://www.usagundamstore.com/products/pre-order-black-action-base-5?variant=49149953167&currency=USD&utm_medium=product_sync&utm_source=google&utm_content=sag_organic&utm_campaign=sag_organic&gclid=Cj0KCQjwjvaYBhDlARIsAO8PkE1rZ7dQrKWyU-YJ7NkAEjGGZ3eeKfcuHnwC42hsgGj3E1ObWF9jf2EaAl8UEALw_wcB Each hex space is the same size as an action base 4/5 - 4.5 inches]. This eliminates the need for measuring tools and makes movement/weapon ranges easier to calculate.


[[file:Parts list v3.png | border| left| 420px |link=https://docs.google.com/spreadsheets/d/17BZ1F7FpO5finnEYQVINvdjePFtv_WhdVBI6JZ_mXLk/edit#gid=1319329094]]
However, if a person wishes to play without hexes all movement can be done with action bases and movement being 4.5 inches per movement point.


The spreadsheet also includes a few other things you will need to fill out a Datasheet. This includes:
A full-sized battlefield measures 14 hexes (58.5 in) on the long side by 11 hexes (38.3 in) on the short side, with the flat sides facing each player.  
* The full list of Systems, Mods, and Traits.
* Weapon/Equipment Calculator
* Core Section Calculator


The Systems, Mods, and Traits (SMT) list allows players to determine the best abilities/bonuses for their Unit. The number of SMTs is based on Pilot/A.I. Rank.
Missions will give suggestions on more specific terrain setups. It is suggested a matching terrain setup for each side when playing a destroy all targets type mission.


The Weapon/Equipment Calculator is used to determine the stats of Weapons/Equipment used by each Unit.
<br/>
The Core Section Calculator is used to determine the maximum Defense of a Core Section.


A detailed guide will be compiled on how to use the calculators as well as filling out the Unit Datasheet.
=== Pre-Deployment ===
<br clear=all>


=== Systems, Mods, & Traits ===
Players roll 1D8 to determine who goes first. The higher roll chooses who gets to be Attacker and who gets to be Defender. The Attacker goes first and has starting initiative, but the Defender chooses their Deployment Area.
These are additional Abilities a Unit can obtain.
* Systems: Abilities gained when specific model pieces are attached to a Unit.
* Mods: Buffs gained based on a Unit pilot's rank. Chosen during the pilot creation process.
* Traits: Playstyle-altering Abilities gained based on a Unit pilot's rank. Chosen during the pilot creation process.


=== Pilots ===
In 3+ player games, players choose which team to participate on and share Units and turns with their teammates.
Once you have created your Unit and its Datasheet, you will then need to make a Pilot Identification Card.
At the start of the round players roll for initiative with the higher roll, giving the first chance to move a unit.
 
Pilots are vital to diversifying a Unit's playstyle. Pilots grant their Unit special abilities called "Traits". These differ from Systems and Mods by offering playstyle changes instead of different attacks or utility abilities.
 
Below you will see a chart showing the differences between ranks and the benefits they grant the Unit they pilot.
 
{| class="wikitable" style="text-align:center; background-color:#F8F9FA; color:#202122;" style="margin: auto;"
|- style="font-weight:bold; background-color:#EEE;"
! colspan="5" | Rank Advancement
! colspan="3" | Rank Names
|- style="font-weight:bold; vertical-align:middle; background-color:#EEE;"
| Rank
| Stat Reduction Modifiers
| Mods
| Traits
| Deployment Cost
| Earth Alliance
| Byron Army
| Maxion Army
|- style="vertical-align:middle;"
| 1
| 0
| 0
| 1
| 0
| Private
| Petty Officer
| -
|- style="vertical-align:middle;"
| 2
| 1
| 1
| 1
| 20
| Corporal
| Chief
| -
|- style="vertical-align:middle;"
| 3
| 2
| 2
| 1
| 60
| Sergeant
| Master Chief
| -
|- style="vertical-align:middle;"
| 4
| 3
| 2
| 1
| 120
| Lieutenant
| Ensign
| -
|- style="vertical-align:middle;"
| 5
| 4
| 3
| 2
| 200
| Captain
| Lt. Commander
| -
|}


Pilot Identification Cards and how to fill them out can be found in the [[Datasheets | Datasheets / IDs]] page.
=== Deployment ===
Once the attacker and defender have been selected, it is now time for the players to deploy their squads to the battlefield. Each side has a dedicated Deployment Area laid out in the mission details. Standard Deployment Areas are the first 3 hexes from the short side table edge on both sides.


=== Modified Rolls ===
Starting with the attacker, they will place one Unit within their Deployment Area on any elevation/terrain they see fit. If their Unit flies/swims, they may start in the air/water but must place a token down notating its elevation. Once the attacker's Unit has been deployed, the defender does the same. In an alternating fashion, both players continue to deploy Units until everyone is on the battlefield. If a player has any Units in reserve [Tentative name change] place them off to the side until given orders to deploy.
Systems, Mods, and Traits often give bonuses to the Unit in the form of Modified Rolls. Modified Rolls only affect D8 rolls 2-7. Modifiers DO NOT AFFECT D8 rolls of 1 or 8.


If an effect states " (+/- number) to (Stat) Roll" then you apply that number to the relevant roll.
After both sides have deployed their Units, the Deployment Phase has ended and the beginning of the Round can begin.
* Unit rolls a 4 for Assault Roll. Modifier: "+2 to Assault Rolls". The final Assault Roll is 6.
* Unit rolls a 6 for Accuracy Roll. Modifier: "-3 to Accuracy Rolls". The final Accuracy Roll is 3.
* Unit rolls an 8 for Accuracy Roll. Modifier: "-2 to Accuracy Rolls". The final Accuracy Roll is still 8
* Unit rolls a 1 for Assault Roll. Modifier: "+4 to Assault Rolls". The final Assault Roll is still 1


=== Modified Stats ===
=== Rounds ===
Similar to Modified Rolls, these are bonuses that affect the Unit's Stats. However, these modifiers must be made to the Unit's Datasheet.


A rank 4 Pilot gives a Stat Reduction Modifier (S.R.M.) of 3 points. These points can be used to freely alter the Unit's base stats to fit the player's playstyle. There is, however, a maximum limit to how low a Unit's stats can go: 2 in Accuracy, 2 in Assault, and 2 in Evasion (or 2/2/2, for short).  
Then the player with initiative activates a Unit which starts the Unit's turn. A turn consists of three phases in order: Movement Phase, Ranged Combat Phase, and then Close Combat Phase. Units can only be activated once per Round. After the unit has completed its turn the next player with initative may activate a unit. This continues until all players have activated a unit then the player who started the round may activate another unit. If a player has no Units left to act with, they skip their turn. Once all players have run out of Units with available turns, that Round is over. When the Round is over, a new Round begins with the same player starting first. This continues until the Mission is completed or a player surrenders.


Systems, Mods, and Traits can further lower a Unit's stats but are normally restricted to a single stat. When a Unit has an SMT that modifies a given stat, the change is recorded on its Datasheet under the section "Modified Stats".
When a Unit has been activated, place down an Activation token next to the Unit. Once the Unit has finished its turn, flip the token over to Inactive. This indicates that the Unit has already been activated during that round and cannot be activated again. When a new round begins, remove all Inactive tokens from the battlefield.


=== Tags ===
==== Phases of a Turn ====
Tags are a simple way to identify a part's specific usage or restrictions. You can check if a part has a tag by viewing the "Tag" column in the Parts List which lists tags by abbreviation. Not all parts have tags and some parts may have multiple tags. Multiple tags are more common with Core Sections or built Weapons.  
[[File:PoC.png | frame |right| Phases of a turn are sequential]]
Each turn is separated into 3 phases; Movement Phase, Ranged Combat Phase, and the Close Combat Phase. When the player activates a Unit, that Unit must act in each phase sequentially. They are allowed to skip over phases but they cannot go back to a prior or skipped phase afterward.


==== Categories ====
===== Movement Phase =====
{| class="wikitable" style="margin: auto;"
Steps:
|- style="font-weight:bold;"
;1. Choose a Unit to Activate
! Name
;2. Roll AP
! Tag
;3. Move the Unit
! Description
|-
| Weapon
| style="text-align:center;" | [WN]
| Identifies a weapon that can be equipped/used under normal circumstances.
|-
| Mounted Weapon
| style="text-align:center;" | [MW]
| Identifies a weapon that is mounted to the Unit. Explodes when destroyed.
|-
| Equipment
| style="text-align:center;" | [EQ]
| Identifies a part as equipment.
|-
| Shield
| style="text-align:center;" | [SD]
| Identifies a part as a shield.
|-
| Thruster
| style="text-align:center;" | [TH]
| Identifies a part as a thruster.
|}


==== Weapon Specific ====
[[File:Active.png | frame| right| Active Token]]
Choose a Unit to activate then the Movement Phase begins. First, place down an Active Token next to the Unit The token is to keep track of which Units have already been activated during that turn. Then roll 1D8 to see how many Action Points the Unit can add to its Base AP. Action Points can be used throughout that Unit's turn on Attacking or Command Actions. Any Action Points that do not get used are stored and can be used in future turns. This is capped at 16 AP per Unit. Place a D20 next to the Unit to keep track of its stored AP.


<div style="column-count:3">
Next, a Unit may take a Move action. There are multiple types of movement based on the capacity of the unit. A unit may move onto one of the three hexes within the Units Field of View (represented by Fig 3). When using a unit that sits on multiple hexes rotate and move from the lead hex of the unit where the Field of Vision (FoV) originates.
*;Shotgun [SG]: Identifies weapons that enable the Spread Shot System.


*;Machine Gun [MG]: Identifies weapons that enable the Full Auto System.  
'''Standard Movement:''' Moving a Unit normally based on the Standard Movement stat available to its Classification. Units may rotate around on the same hex to change their Field of View at the cost of 1 Standard Movement Point. Once per Movement Phase, a Unit can rotate freely around on the same hex without having to use a Standard Movement Point. Units cannot see beneath their elevation or behind themselves unless otherwise stated. When moving up an elevation the movement costs 2 Standard Movement Points. While moving in water it costs 2 Movement Points to leave the water and 2 Movement Points to move between hexes.  


*;Gun Blade [GB]: Identifies weapons that enable the 2 For 1 System.
'''Thruster Movement:''' The Thruster Movement stat doubles the Units Standard Movement. The direction of travel is linear and must move the full amount listed. Only available to use when the Unit has any thrusters attached. <!-- If the Unit cannot move the full amount, the player must choose another route or end its turn. When used the unit forfeits its Combat Phases.  -->
<br />


*;Explosive [EO]: Identified weapons that enable the Splash Damage System.
====== Movement Options ======
When a Unit meets the required amount of thruster durability, they have the option to use the following movement options. Use the chart below to determine which option is available to your Unit.


*;Two Handed [2H]: Requires a Weapon to be used with two hands. Can be used in a single hand with an additional AP cost of 3 per attack.
'''Hover:''' Using this movement may gain or lose 1 elevation per turn with the cost of a Standard Movement Point. This Unit may be in the air without support without falling. However, it must keep its Thruster Durability above the cost labeled below or it will lose the Hover Movement Action. If the Unit loses enough Thruster Durability to have it lose the Hover Move Action then it falls to the ground taking fall damage. When falling move the unit to the ground and take fall damage immediately after the damage was dealt. Otherwise, this is the same as a Standard Move.  


</div>
'''Flight:''' Using this movement may gain or lose as many elevations per turn as it has Movement Points. Otherwise, this is the same as a Standard Move. This Unit may end its Movement Phase in the air without support and without falling. However, it must keep its Thruster Durability above the cost labeled below or it will lose the Flight Movement Action. If it loses the Flight Move Action but still has the Hover Move Action then it does not fall to the ground and instead is still considered to be in the air. Otherwise, this is the same as a Standard Move.


==== Equipment Specific ====
'''Cruise:''' In Water Tiles, the Cruise Move Action only costs 1 Move Action Point to move from one tile to the other. If a unit moves underwater it costs 2 Move Points, and the unit requires 2 Movement Points to move from one elevation in the Water Tile to the other. Moving out of the water to the land only costs 1 Move Point, however, if the unit does not have the Standard Movement action it costs 3 points to move on non-Water Tiles.


<div style="column-count:3">
'''Swim:''' In Water Tiles, the Swim Move Action only costs 1 Move Action Point to move from one tile to the other. If a unit moves underwater it costs 1 Move Point, and the unit requires 1 Movement Point to move from one elevation in the Water Tile to the other. Moving out of the water to the land only costs 1 Move Point, however, if the unit does not have the Standard Movement action it costs 3 points to move on non-Water Tiles.


*;Core Thruster [CT]: Identifies a Core Part as a thruster but does not need to be placed into the Equipment Section on the Datasheet.  
[[File:Movement options.png| frame | center | ]]


*;Drone Flight [DF]: Indicates that a drone can fly in the air.
<br>


*;Drone Land [DL]: Indicates that a drone can walk on land.
[[File:Rsz fovplus.png| frame |left | Fig 3a on the left shows a Top-Down perspective of a Unit's Field of View while fig 3b on the right shows a Side-View perspective with an elevation higher and lower than the Unit. Arrow indicates directional movement.]]


*;Drone Swim [DS]: Indicates that a drone can swim in the water.
<br />
'''Movement Within a Hex:''' Depending on the size of each Unit and the terrain it's on, you may find that you have a fair bit of room inside the hex your Unit resides on. Your Unit may move around freely inside the hex as long as 80% of the Unit is inside and is facing the direction it stopped in. You may use this to set up ambushes/ firing positions/ or take better cover.


*;Drone Turret [DT]: Indicates that a drone cannot move from its initial deployed hex but can still attack.
Two friendly Units may occupy the same hex as long as they do not physically overlap with one another. Two Units on opposing sides cannot occupy the same hex unless stated otherwise or one is on another elevation from the other.


[[File:Movement.png | frame |center| Fig 4a on the left shows allied Units 80% within the hex upon which they are standing and multiple Units on the same hex that are not overlapping. Fig 4b on the right shows opposing Units occupying the same hex, Units that are more than 80% outside their respective hex, and multiple friendly Units overlapping on the same hex.]]


</div>
==== Combat ====
Steps:
;1. Determine if Target Unit is in Line of Sight
;2. Select Core Part or Equipment to target
;3. Select a Weapon to attack with and measure Range
;4. Roll Attack
;5. Roll Evasion
;6. Allocate Damage


=== Proxies ===
Choose a target that is within your Unit's Field of View (FoV) and Line of Sight (LoS).
It is possible to use other model kits and/or non-30MM parts to play. These are called Proxies. You will still need to properly notate what they are representing as 30MM parts/Weapons on the Datasheet. It is advised that you still familiarize yourself with the Parts List if you choose to use proxies.


== Gameplay ==
FoV is determined by the first three hexes in front of your Unit in the direction it's facing- a Unit's Field of View includes all unobstructed hexes past those first three hexes. LoS is determined by using a straight line directly from the head of your Unit to the target. The Unit's Weapon must also have a clear LoS. If you can clearly see 80% the part you want to attack you may do so. If a unit takes up multiple hexes use the most lead hex to determine FoV. <!--If the Unit's Weapon AND head do not have a clear LoS, the Unit cannot Attack.-->


==== Board Setup ====
[[File:Core Section Targets smol.png| frame |center | The image depicts which Core Sections of the Alto (in red) are exposed when it's behind various pieces of cover. Left: Head, Torso, Left Arm, and Left Leg. Right: Head, Left and Right Arms, and Torso.]]
All Missions take place on a battlefield comprised of Hexagon tiles. [https://www.usagundamstore.com/products/pre-order-black-action-base-5?variant=49149953167&currency=USD&utm_medium=product_sync&utm_source=google&utm_content=sag_organic&utm_campaign=sag_organic&gclid=Cj0KCQjwjvaYBhDlARIsAO8PkE1rZ7dQrKWyU-YJ7NkAEjGGZ3eeKfcuHnwC42hsgGj3E1ObWF9jf2EaAl8UEALw_wcB Each tile is the same size as an action base 4 / 5]. A full-sized battlefield measures 16x13 hexagonal tiles, or 202 total hexes, with the flat side facing each player. Both sides need to be identical to the other so it doesn't create any unfair advantages.


==== Turn Order ====
After you have determined the Unit is within view check the Range stat of the weapon you wish you use. Measure the range from the first hex in front of the Attacking Unit to the Target Unit. If the Target Unit is a distance under or equal to the Range stat then you may complete the attack. Measuring for this may be done at any time as long as it doesn't slow down gameplay.
[[File:Deploy.png| frame | right| 16x13 hex board with the basic Deployment Area highlighted]]


Each player acts with a single Unit during their turn consisting of three phases in order: Movement Phase, Ranged Combat Phase, and then Close Combat Phase. Units can only act once per Round. If a player has no Units left to act with, they skip their turn. Once all players have completed their turns, that Round is over. When the Round is over, a new Round begins with the same player starting first. This continues until the Mission is completed or a player surrenders.
[[File:Flow chart new.png |frame |center | Order of operations for Attack Rolls]]


Players roll 1D8 to determine who goes first. The higher roll chooses who gets to be Attacker and who gets to be Defender. The Attacker goes first, but the Defender chooses their deployment area first.
Attacking is resolved with D8 rolls using the three stats: Accuracy, Assault, and Evasion. The player needs to roll '''equal to or higher than''' the Modified value shown on the Unit's Datasheet for every attack being made.
 
In 3+ player games, players choose which team to participate on and share Units and turns with their teammates.
 
==== Combat ====
All distances are measured in hexes starting from the hex directly in front of a Unit. When attacking, you will need the target within the range of hexes set by your Datasheet. You will also need the target to be within your Unit's Field of View (FoV) and Line of Sight (LoS).
 
FoV is determined by the first three hexes in front of your Unit in the direction it's facing- a Unit's Field of View includes all unobstructed hexes past those first three hexes. LoS is determined by using a straight line directly from the head of your Unit to the target. The Unit's Weapon must also have a clear LoS. If you can clearly see the part you want to attack you may do so. If the Unit's Weapon AND head do not have a clear LoS, the Unit cannot fire.
 
Combat is resolved with D8 rolls using the three core stats: Accuracy, Assault, and Evasion.
* Accuracy is used in Ranged Combat to determine a Unit's chances of hitting its target with a Ranged Weapon.  
* Accuracy is used in Ranged Combat to determine a Unit's chances of hitting its target with a Ranged Weapon.  
* Assault is used in Close Combat and determines a Unit's chances of hitting its target with a Melee Weapon.
* Assault is used in Close Combat and determines a Unit's chances of hitting its target with a Melee Weapon.
* Evasion is used throughout combat and determines the chances a Unit has of dodging incoming attacks.
* Evasion is used throughout combat and determines the chances a Unit has of dodging incoming attacks.


In combat, players are aiming to roll a higher number than their Unit's relevant stat. For Units attacking, this will be the Accuracy or Assault stat. For defending Units, this will be the Evasion stat. Rolls can be [[Core_Rules#Modified_Rolls | modified by temporary buffs/debuffs]] during Engagements while [[Core_Rules#Modified_Stats | stats can be modified permanently via SMTs on the Unit's Datasheet]]. For a detailed breakdown of how combat is resolved specifically, see [[Core_Rules#Ranged_Combat_Phase | Combat Phases]].
While making attacks Attacking Units will use their Accuracy or Assault stat. If the Attack is a success then the Defending Units will use their Evasion stat. Rolls can be [[Core_Rules#Modified_Rolls | modified by temporary buffs/debuffs]] during Engagements while [[Core_Rules#Modified_Stats | stats can be modified permanently via SMTs on the Unit's Datasheet]]. For a detailed breakdown of how combat is resolved specifically, see [[Core_Rules#Ranged_Combat_Phase | Combat Phases]].  
 
===== Phases of a Turn =====
[[File:PoC.png | frame |right| Phases of a turn are sequential]]
When the player chooses a Unit to act, that Unit must act in each phase sequentially. They are allowed to skip over phases but they cannot go back to a prior or skipped phase afterward.
 
 
 
===== Movement Phase =====
Once you have chosen a Unit to act, the Movement Phase begins.


First, roll 1D8. This is to see how many Action Points the Unit can add to its Base AP. These can be used throughout that Unit's turn. Any Action Points that do not get used are stored and can be used in future turns. This is capped at 16 AP per Unit unless otherwise stated. Use a D20 to keep track of stored AP.
If the weapon succeeded its Attack Roll and the Evasion Roll of the Defending Unit failed then deduct the Damage of the stat from the Durability of the Core Part or piece of Equipment that was Targeted. If that Part was destroyed then it is considered Inoperable and may no longer be used in the game. Core Parts being destroyed have detrimental effects on the Unit as detailed later.  


Next, move to the desired hex using the Standard Movement or Thruster Movement options.
'''Critical Hits:''' Critical Hits are rolls of 8 when making an Attack Roll. They are always considered hits regardless of other modifiers.  


;'''Standard Movement:'''  
'''Critical Misses:''' Critical Misses are rolls of 1 when making an Attack Roll. They are always considered misses regardless of other modifiers.  
:Moving a Unit normally based on its Classification.
;'''Thruster Movement:'''
:Doubles the Units Standard Movement at the cost of forfeiting its Combat Phases. Direction of travel is linear and must move the full amount. If the Unit cannot move the full amount, the player must choose another route or end its turn. '''Only available to use when Unit has thrusters attached.'''


[[File:New direction.png | frame |left | Fig 3a on the left shows a Top-Down perspective of a Unit's Field of View while fig 3b on the right shows a Side-View perspective with an elevation higher and lower than the Unit. Arrow indicates directional movement.]]
====== Ranged Combat Phase ======
If a Unit chooses to take the Ranged Combat Phase then it may use any Ranged Weapon it has to attack with. Follow the steps for Combat as shown above and use the Accuracy stat for the Attack stat. If a unit depletes all of its AP before the Melee Combat Phase, the phase is skipped and the unit is moved to the Inactive state.
<!--Once you have determined your attacking Weapon(s); confirmed that the enemy is within range, Line-of-Sight, and Field of View; and selected which section you want to attack: subtract the AP it costs to fire that Weapon from the Unit's Stored AP. If a player has enough stored AP, they may attack more than once by subtracting the Weapon's AP cost multiple times. After paying the AP cost, the player conducts an Accuracy Roll.


Units can only move forward to the three hexes within their Field of View (represented by the green hexes in fig 3a). Units may also rotate around on the same hex to change their Field of View at the cost of 1 Standard Movement Point. Once per Movement Phase, a Unit can rotate freely around on the same hex without having to use a Standard Movement Point. Units cannot see beneath their elevation or behind themselves unless otherwise stated.
* On the Unit's Datasheet, there is a value that represents its Accuracy stat. Using a D8, the player needs to roll equal to or higher than the Modified Accuracy value shown on the Unit's Datasheet for every attack being made. If the roll (plus or minus any bonuses) does not meet the requirement or they roll a 1, then the shot misses. If the roll does meet the requirement, then the enemy has a chance to evade. If the roll is an 8, however, the shot is a Critical Hit and cannot be evaded. Critical Hits deal 1.5x (rounding up) the Base Damage of the Weapon.


* On the enemy Units Datasheet, there is a value that represents a Units Evasion stat. Using another D8, the enemy player will conduct an Evasion Roll for every shot that passed its requirement but wasn’t a Critical Hit. If the enemy player's roll meets that requirement (plus or minus any bonuses) or rolls an 8, then they successfully evade the incoming shot. If the enemy failed to meet the requirement (plus or minus any bonuses) or rolls a 1, then the shot hits the targeted Section. -->
====== Close Combat Phase ======
The Close Combat Phase is similar to the Ranged Combat Phase with the major difference being that instead of using Ranged Weapons to attack, the Unit uses Melee Weapons. All melee weapons have a range of 1 unless otherwise stated. Instead of conducting an Accuracy Roll, the player will conduct an Assault Roll. The process listed above otherwise applies to this Phase.


Once all phases have ended, unused AP is stored using the D20, and the Active token is flipped over to the Inactive side. This signifies that the Unit cannot be activated again during that round.


 
'''Basic Attacks'''
 
Every Unit can use Basic Attacks, which is the name for any unarmed strike using any limb. These attacks are done during the Close Combat Phase. These attacks are not capable of doing Critical Hits on rolls of 8. All basic attacks have the same stats regardless of classification:  
 
 
 
 
 
 
'''Movement Within a Hex'''
 
Depending on the size of each Unit and the terrain it's on, you may find that you have a fair bit of room inside the hex your Unit resides on. Your Unit may move around freely inside the hex as long as 80% of the Unit is inside and is facing the direction it stopped in. You may use this to set up ambushes/ firing positions/ or take better cover.
 
Two friendly Units may occupy the same hex as long as they do not physically overlap with one another. Two Units on opposing sides cannot occupy the same hex unless stated otherwise or one is on another elevation from the other.
 
[[File:Movement.png | frame |center| Fig 4a on the left shows allied Units 80% within the hex upon which they are standing and multiple Units on the same hex that are not overlapping. Fig 4b on the right shows opposing Units occupying the same hex, Units that are more tha 80% outside their respective hex, and multiple friendly Units overlapping on the same hex.]]
 
===== Ranged Combat Phase =====
Using your Unit's Datasheet, determine which Ranged Weapon(s) you want to attack with and if the enemy is within its range and you can afford its AP cost. Next, determine which Core Section you want to attack. Be sure to have direct Line-of-Sight to the targeted Section within your Field of View. If you do not have both, you cannot attack that Section.
 
Once you have determined your Weapon; confirmed that the enemy is within range, Line of Sight, and Field of View; and selected which Section you want to attack: subtract the AP it costs to fire that Weapon from the Unit's Stored AP. If a player has enough stored AP, they may attack more than once by subtracting the Weapon's AP cost an additional time. After paying the AP cost, the player conducts an Accuracy Roll.
 
* On the Unit's Datasheet, there is a value that represents its Accuracy. Using a D8, the player needs to roll '''equal to or higher than''' the Accuracy value shown on the Unit's Datasheet. If the roll (plus or minus any bonuses) does not meet the requirement '''or''' they roll a one, then the shot misses. If the roll does meet the requirement, then the enemy has a chance to evade. If the roll is an eight, however, the shot is a Critical Hit. Critical Hits deal 1.5x (rounding up) the base damage of the Weapon and cannot be evaded by enemies so they do not need to roll for evasion.
 
* Using a D8 again, the enemy player will conduct an Evasion Roll. On the Datasheet, there is a value that represents a Units Evasion. If the enemy player's roll meets that requirement (plus or minus any bonuses) or rolls an eight, then they successfully evade the incoming shot. If the enemy failed to meet the requirement (plus or minus any bonuses) or rolls a one, then the shot hits the targeted Section.
 
Every shot that successfully hits has that Weapon's base damage (plus or minus any bonuses) subtracted from the enemy Unit's Core Section Max Defense.
 
Repeat this process for each shot that the Unit takes during the Phase. Once all attacks have been resolved, the Phase ends.
 
===== Close Combat Phase =====
The Close Combat Phase is similar to the Ranged Combat Phase with the major difference being that instead of using Ranged Weapons to attack, the Unit uses Melee Weapons. Instead of conducting an Accuracy Roll, the player will conduct an Assault Roll. The process listed above otherwise applies to this Phase.
 
[[File:Flow chart new.png |frame |center | Order of operations for Attack Rolls]]
 
===== Basic Attacks =====
Every Unit can use Basic Attacks, which is the name for any unarmed strike using any limb. These attacks are done during the Close Combat Phase. All basic attacks have the same stats regardless of classification:  


* 1 AP Cost
* 1 AP Cost
Line 408: Line 321:
* 1 Range
* 1 Range


===== Grappling =====
'''Grappling'''
Every Unit that has hands can Grapple. The range to Grapple is 1 hex. Grappling can only be performed during the Close Combat Phase.
Every Unit that has hands can Grapple. The range for a Grapple is 1 hex. Grappling can only be performed during the Close Combat Phase. To engage in a Grapple, the attacking Unit makes an Assault Roll. If successful, the enemy then makes an Evasion Roll. If the enemy passes its Evasion Roll, then the Grapple is over and the attacker can no longer engage in another Grapple against that Unit. If the enemy fails its Evasion Roll, then the Grapple is successful.


{| class="wikitable" style="margin: auto;"
When a Unit successfully Grapples, it occupies the same hex as the enemy and is able to do one of two things: Throw or Hold the enemy.
|- style="font-weight:bold;"
 
! colspan="3" | Both Units roll for Assault and complete one of the following based on if they passed or failed:
;'''Hold'''
|-
: Place a "Hold" token next to the Unit. Both Units cannot move from the hex while the Hold token exists. At the start of the next turn, the Unit Holding can attack with any Mounted Weapon or non-2H Weapon. If the Unit wishes to disengage the Grapple, they may use the Break Grapple Command Action and move to the hex they initially started the Grapple from.
| Attacker Pass / Defender Fail
 
| style="text-align:center; font-weight:bold;" | Success
: While being Held, the enemy can no longer Evade incoming attacks. At the start of its next turn, it can use the Break Grapple Command Action to free itself. When used, it moves to the hex directly behind it and faces the attacker. If that hex is unavailable, it may move to one of the other hexes in its blind spot facing the attacker. If no hexes are available, the Command Action cannot be used and the turn is over. Held Units cannot use Mounted Weapons.
| Attacker can Hold or Throw the Defender.
|-
| Attacker Pass / Defender Pass
| style="text-align:center; font-weight:bold;" | Re-Roll
| Attacker can attempt another Grapple without having to use AP.
|-
| Attacker Fail / Defender Fail
| style="text-align:center; font-weight:bold;" | Disengage
| Attacker can attempt another Grapple by spending AP.
|-
| Attacker Fail / Defender Pass
| style="text-align:center; font-weight:bold;" | Fail
| Attacker cannot attempt another Grapple.
|}


When a Unit successfully Grapples, they are able to do one of two things:
;'''Throw'''
{| class="wikitable" style="margin: auto;"
: An enemy can only be Thrown within the FoV of the attacking Unit. Use the Throw Distance formula to determine the maximum distance the enemy can be Thrown: [8 - (attacker Modified Assault Stat)]. The attacking Unit can Throw the defending Unit anywhere within this maximum distance. Units can only be Thrown to the same elevation or lower. Units are unable to Throw other Units that have a higher Classification. Units that are Thrown to a lower elevation also take Fall Damage.
|- style="font-weight:bold; text-align:center;"
! style="font-weight:normal; text-align:left;" | Options
! Attacker
! Defender
|-
| style="text-align:center; font-weight:bold;" | Throw
| Throw enemy Unit a max of (Attack Class + 1D4*) hexes within FoV and deal (Throw Distance x 2 - Defend Class) Damage to Unit's Chest.
| Unit lands on its back facing the Unit that Threw them.
|-
| style="text-align:center; font-weight:bold;" | Hold
| Holds enemy Unit in place. May attack with a one-handed Weapon during the next turn.
| Cannot perform or evade incoming attacks. Grapple continues over to the next turn.
|}


The Grapple is only over if;
: Once the attacker specifies a hex for the defending Unit to land on, they then roll for Assault. This is to check Deviation (link). Pass, the Unit goes where intended. Fail, attacking Unit rolls 1d8 for Deviation and lands there instead.
# The Attacker fails the Assault Roll.
# The Defender is Thrown.
# The Defender uses the "Break Contact" Command Action after being held.  


;Whether a Defending Unit is Thrown or Held, the Attacking Unit now occupies the hex that the defending Unit was on.  
: After the landing hex is determined, the defending Unit is placed on the specified hex on its back, face up, with its feet pointed at the attacker. The defending Unit receives Collision Damage [2(Defender Classification * Thrown Distance)] to its torso. While on the ground, the defending Unit cannot Evade incoming attacks. If the attacking Unit has no more AP to spend, the turn is over. On the defending Unit's next turn, it must use the GetUp Command Action to get back on its feet. Otherwise, it will remain on the ground.
: If Thrown, the Defending Unit moves to the specified hex.
: If Held, both Units occupy the same hex until the attacking/defending Unit Breaks Grapple, at which point the defending Unit moves to the hex directly behind where it was being held.


&lowast; For a makeshift 1D4, roll a D8 (1/2 = 1, 3/4 = 2, 5/6 = 3, 7/8 = 4)
: Enemy Units can also be thrown into structures as well as other Units.


<div class="mw-collapsible mw-collapsed" data-expandtext="Show More" data-collapsetext="Hide Me">
;'''Thrown into another Unit'''
====== <u>Throwing Enemies into Structures, Units, or Elevation Changes </u> ======
: If the attacker has specified a hex for the defending Unit to land on and its path is occupied by other Unit(s), the other Unit(s) will conduct an Evasion Roll. If successful, the defending Unit lands on the specified hex same as above and the other Unit(s) are untouched. If the other Unit(s) fails its Evasion roll, they take Collision Damage as well as the defending Unit and are now on the ground. This also includes allied Units.
<div class="mw-collapsible-content">
Normally, Throwing a unit deals (Throw Distance x 2 - Defender Class) in damage to the torso.  


If the target is Thrown into a structure, that damage is applied to the structure as well as the Unit:
;'''Thrown into a Structure'''
* If the damage is greater than the current defense of the structure, then the structure falls on the unit dealing 50% of its total defense in damage along with the Throw damage.
: If the attacker has specified a hex for the defender to land on and it's occupied by a structure, place the defender on the same hex as the structure but not on the structure itself. Then apply Collision Damage to the defender's torso.  


* If the damage is less than the current defense of the structure, then that value is subtracted from its current defense and the Unit gains the status effect "Stuck".
: If the damage is less than the current Defense of the structure, the structure remains and the status effect "Stuck" is given to the Unit.  


If the target is Thrown into another Unit:
: If the damage is greater than the current Defense of the structure, the structure falls on top of the Unit and the current Defense is applied as Bonus Damage to the Unit's torso. Remove the structure from the battlefield and replace it with a Black Hex. Then place the defending Unit on its back facing up with its feet facing the attacker. On the defending Unit's next turn, it must use the GetUp Command Action to get back on its feet. Otherwise, it will remain on the ground.
* Throw damage is calculated normally, but with the Classification of the other unit being added as bonus damage. The target and the other Unit both receive that damage.  


<div style='text-align: center;'>'''Below is an image that depicts the flow of grappling'''</div>
===== End of Round =====
[[File:Grappling_Flow.png|center|1000px]]
Both players will take turns activating their Units and completing each phase. Once all Units have been activated the Inactive tokens are removed from every Unit and a new round begins. This continues until the Mission is completed or the turn limit has been reached.
</div>
</div>
<br clear=all>


===== Destroying Core Sections =====
=== Destroying Unit Sections ===
When a limb is destroyed, remove the physical section from the model* and then apply the respective status effect accordingly:
When a limb is destroyed, remove the physical section from the model* and then apply the respective status effect accordingly:


{| class="wikitable" style="text-align:center;"
{| class="wikitable" style="text-align:center;"
|- style="font-weight:bold;"
|- style="font-weight:bold;"
! Core Section
! Unit Section
! Description
! Description
|-
|-
Line 504: Line 379:
∗A player can opt out of physically removing the section from the model by placing down the respective Destroyed Limb token. Status effects still apply.
∗A player can opt out of physically removing the section from the model by placing down the respective Destroyed Limb token. Status effects still apply.


===== Destroyed vs Inoperative =====
==== Destroyed vs Inoperative ====
When the '''Torso Defense Points''' of a Unit are reduced to 0, the Unit is considered destroyed. If a Mech Unit's Torso remains intact but its limbs are all destroyed, it is considered Inoperative. If a Vehicle Unit's Torso remains intact but it loses its ability to move, it is considered Inoperative. An Inoperative Unit can continue participating in the Engagement if it still has Drones that have not been destroyed.
When the ''' Torso Durability Points''' or '''Cockpit Durability Points''' of a Unit are reduced to 0, the Unit is considered destroyed. If a Mech Unit's Torso Core Part remains intact but its limbs are all destroyed, it is considered Inoperative. If a Vehicle Unit's Cockpit Core Part remains intact but it loses its ability to move, it is considered Inoperative. An Inoperative Unit can continue participating in the Engagement if it still has Drones or Mounted Weapons that have not been destroyed.


There are 4 unique areas to a Standard Mech Unit:
There are 4 unique areas to a Standard Mech Unit:
Line 515: Line 390:
Destroying each one results in a different penalty for that Unit.
Destroying each one results in a different penalty for that Unit.


===== Weapons & Equipment =====
=== Command Actions ===
Actions that can be made during a Units turn but aren’t tied to a specific phase. All Command Actions require 2 Action Points to conduct and can be used multiple times within a single turn. Command Actions (CA’s for short) are divided into 3 categories: State, Stance, & Order.


====== <u>Ranges</u> ======
* States are togglable actions.  
Ranged Weapons will have different attack ranges depending on the parts used. '''Melee Weapons will always have a range of 1''' unless specifically stated elsewhere. To determine a Unit's range from its target, count the hexes on the battlefield starting with the hex directly in front of the attacking Unit to the enemy Unit. The enemy must be on or within the specified range of your attacking Weapon. When determining the range to/from an elevation, that elevation number must also be included in the distance to the target.
* Stances are actions that can be taken out of turn. Activating these immediately ends the Units turn.
<blockquote style="background-color: lightgrey; border: solid thin grey;">
* Orders are actions given to drones.
* If you were on -2 elevation attacking an enemy who was 6 hexes away on +1 elevation, the total range would be 9 hexes. So your Weapon would need to have a range of at least 9 to attack.
</blockquote>
 
====== <u>Destroyed</u> ======
Weapons/Equipment that are destroyed can no longer be used. The Systems/Mods attached to those parts are also lost.
 
====== <u>Mounted Weapons</u> ======
When mounted Weapons are destroyed, the player rolls 1D8. On a 6+, the destroyed Weapon deals damage equal to 50% of its base damage (rounded up) to the Core Section it is directly connected to. If the player rolls a 5 or lower, the Weapon is still destroyed but does not harm the Unit.


====== <u>Redundancy</u> ======
<googlespreadsheet width="800px" height="400" style="width:100%">1_C7NQJUp3Mp4f-um1pdjqg1mSETzNeRW1XDPw9KhFiE</googlespreadsheet>
When creating a Unit, you might have multiple copies of the same Weapon attached. This is called Weapon Redundancy or '''"WR"''' for short. A Weapon with multiple copies reduces its AP cost by 1 for every copy after the first, to a maximum reduction of 4 AP. A Weapon cannot be reduced past half of its initial AP cost (rounding up). If the reduction would bring the AP cost to 2 or lower, the Weapon's AP cost is reduced to 2, and the damage is increased by 1 for every 2 of the same Weapon available.


<blockquote style="background-color: lightgrey; border: solid thin grey;">
=== Status Effects ===
*1 Missile Pod = 12Dmg & 6AP per shot | 4 Total Pods = 12Dmg & 3AP per shot
:: This means that if a player has 4 total missile pods on their Unit, a single attack will do 12Dmg/3AP instead of 12Dmg/6AP.
*1 Pistol = 3Dmg & 2AP per shot | 4 Total Pistols = 5Dmg & 2AP per shot
:: This means if a player has 4 total pistols on their Unit, a single attack will do 5Dmg/2AP instead of 3Dmg/2AP.
</blockquote>
 
When a Unit loses one of those Weapons in battle, they do not keep the same stats. WR only applies to how many copies of the same Weapon that Unit has that are STILL attached. If we use the above examples:
<blockquote style="background-color: lightgrey; border: solid thin grey;">
*4 Total Pods = 12Dmg & 3AP/shot | 2 are destroyed | 2 Total Pods = 12Dmg & 5 AP/shot
:: Since two were destroyed, the AP increases to 5.
*4 Total Pistols = 5Dmg & 2 AP | 1 is destroyed | 3 Total Pistols = 4Dmg & 2 AP/shot
:: Since one was destroyed, the Damage is reduced by 1.
</blockquote>
 
This system is meant to be simple enough to make stat calculation changes in the middle of combat.
 
==== Command Actions ====
 
Any actions that DO NOT deal with the Movement Phase or either Combat Phase. All Command Actions require 2 Action Points to use, can be used multiple times, and can be used at any point during a Unit's turn. Below are the basic Command Actions that can be used:
 
{| class="wikitable" style="text-align:center; vertical-align:middle; background-color:#F8F9FA; color:#202122;"
|- style="font-weight:bold; background-color:#EAECF0;"
! Command Action
! Description
|-
| Get Up
| style="text-align:left;" | When laying on the ground, the Unit can stand back on its feet.
|-
| Press On
| style="text-align:left;" | Gain an additional Standard Movement Point.
|-
| Break Grapple
| style="text-align:left;" | Perform an Assault Roll: If successful, the Unit breaks free. If unsuccessful, the Unit remains in the grapple.
|-
| Swapping
| style="text-align:left;" | A Unit may swap its equipped Weapon with one that it is carrying.
|-
| Retrieving
| style="text-align:left;" | A Unit with a free hand may pick up a Weapon that has been dropped or disarmed from an allied Unit. The Weapon is placed in an open hand as equipped. Must be on the same hex to retrieve.
|-
| Deploy
| style="text-align:left;" | Places up to 3 Drones attached to a Unit onto the battlefield. Max of 3 active Drones.
|-
| Transform
| style="text-align:left;" | Transforms the Unit into its Alternate form if applicable. While Transformed, the Unit loses control of its limbs but gains bonuses determined by the vehicle it Transformed into. Weapons with the tag Gun Blade [GB] can also transform into an Alternative form. This must be used again to change back into its original form.
|-
| Kneeling Position
| style="text-align:left;" | A Unit physically gets into the kneeling position. Gain +1 to Accuracy Rolls. Cannot Evade while kneeling. Can only be done once per turn. The Unit must use the Get Up AC to stand back up.
|-
| Prone Position
| style="text-align:left;" | A Unit physically gets into the prone position. Gain +3 to Accuracy Rolls. Cannot Evade while in the prone position. Must kneel before getting into or out of the prone position. Can only be done once per turn. Cannot be used if the direction the Unit is facing is obstructed by a structure or another Unit.
|-
| Offensive Stance
| style="text-align:left;" | A Unit takes aim in a given direction and performs attacks outside of its turn if an enemy moves into the Unit's Weapon's range. The Unit attacks as many times as it's able to with its remaining AP. Stance ends at the beginning of this Unit's next turn.
|-
| Defensive Stance
| style="text-align:left;" | A Unit uses a Shield or any two-handed Weapon as cover in a given direction. All incoming damage is redirected to the Shield/Weapon, but the Unit cannot change directions until the stance is ended. Stance ends at the beginning of this Unit's next turn.
|-
| Recall
| style="text-align:left;" | Docks all of the Unit's active Drones, regardless of position or range.
|-
| Reposition
| style="text-align:left;" | Moves any active, non-A.I. Drones on the battlefield up to 1 hex. A.I. Drone range is a 2 hex radius from their Unit.
|}
 
==== Status Effects ====
{| class="wikitable" style="text-align:center; vertical-align:middle; background-color:rgba(249, 249, 249, 0.67); color:#222;"
{| class="wikitable" style="text-align:center; vertical-align:middle; background-color:rgba(249, 249, 249, 0.67); color:#222;"
|- style="font-weight:bold; background-color:#EEE;"
|- style="font-weight:bold; background-color:#EEE;"
Line 607: Line 408:
| Conceal
| Conceal
| <>
| <>
| style="text-align:left;" | -2 to Accuracy rolls for every group of green hexes within a Unit's Line-of-Sight to its target. If an attacking Unit is on the hex, then the effect is reduced to -1.
| style="text-align:left;" | Unit gains +1 to their Evasion Rolls against ranged attacks.  
|-
|-
| Overheat
| Overheat
| <>
| <>
| style="text-align:left;" | For every tan hex crossed during a Unit's Movement Phase, the player will multiply that number by 2 and then roll 1D8.  If the player rolls equal to or less than that number, that Unit must be put into the kneeling position and its turn ends. Not moving still applies the effect.
| style="text-align:left;" | Unit is immediately put into the kneeling position and ends its turn.
|-
|-
| Freeze
| Freeze
| <>
| <>
| style="text-align:left;" | For every white hex crossed during a Unit's Movement Phase, the player will multiply that number by 2 and then roll 1D8. If the player rolls equal to or more than that number, that Unit ends its turn, and the next time it's activated its Max AP storage capacity is limited to 8. Not moving still applies the effect.
| style="text-align:left;" | Unit ends its turn immediately. Upon its next activation, its max AP storage capacity is limited to 8.
|-
| Dense Smoke
| <>
| style="text-align:left;" | the Movement Point cost required to move through a black hex is doubled. The rubble also emanates large black smoke clouds. -1 to Accuracy rolls for every group of black hexes within a Unit's Line-of-Sight to its target.
|-
|-
| Euphotic
| Euphotic
| <>
| <>
| style="text-align:left;" | Unless properly outfitted to move in the water, Standard Movement is reduced by 2 Movement Points.  
| style="text-align:left;" | Standard Movement is reduced by 2 Movement Points.  
|-
|-
| Abyss
| Abyss
| <>
| <>
| style="text-align:left;" | Unless properly outfitted to move in the water, Standard Movement is reduced by 2 movement points and the Unit takes 10 damage to the torso per turn.  
| style="text-align:left;" | Standard Movement is reduced by 2 movement points and the Unit takes 10 damage to the torso per turn.  
|-
|-
| Stuck
| Stuck
| <>
| <>
| style="text-align:left;" |  
| style="text-align:left;" | The Unit is unable to move and is considered '''Inoperable''' until the stuck condition is removed.
|-
|-
| Hold
| Hold
| <>
| <>
| style="text-align:left;" |  
| style="text-align:left;" | The Unit is being held by another unit. It may only take the '''Break Hold''' Command Action.
|-
| System Error
| <>
| style="text-align:left;" | Unit ends its turn immediately. Before its next activation, roll 1d8 to reboot. On a 5 or higher, the Unit continues activation per normal. On a 4 or lower, the Unit activation is canceled and its turn ends. Upon subsequent activations, the pass requirement is lowered by 1.
|-
|-
| Airborne
| Airborne
| <>
| <>
| style="text-align:left;" | If a Unit has the Hover/Fly System, place a corresponding token (+1/+2/+3) next to them to indicate their elevation.
| style="text-align:left;" | If a Unit has the Hover/Fly System, place a corresponding token (+1/+2/+3) next to them to indicate their elevation. Remove if on ground level.
|-
|-
| Submerged
| Submerged
| <>
| <>
| style="text-align:left;" | If a Unit has the Cruise/Swim System, place a corresponding token (-1/-2) next to them to indicate their elevation.
| style="text-align:left;" | If a Unit has the Cruise/Swim System, place a corresponding token (-1/-2) next to them to indicate their elevation. Remove if on ground level.
|}
|}


Line 651: Line 452:
When placing terrain colors on the battlefield, different colors need to be placed at least 1 hex apart. If a color description states to place it at a specific elevation, the only elevation that it can be placed is at the Zero Elevation (unless otherwise specified by another rule).
When placing terrain colors on the battlefield, different colors need to be placed at least 1 hex apart. If a color description states to place it at a specific elevation, the only elevation that it can be placed is at the Zero Elevation (unless otherwise specified by another rule).


==== Elevations ====  
=== Elevations ===  
{| class="wikitable" style="float:right; margin-left:10px;"
{| class="wikitable" style="float:right; margin-left:10px;"
|- style="font-weight:bold;"
|- style="font-weight:bold;"
Line 675: Line 476:
| style="text-align:left;" | The lowest point Units can reach.
| style="text-align:left;" | The lowest point Units can reach.
|}
|}
Elevation can be used to give Units a strong advantage in combat. On the tabletop, elevation up or down is measured as 4.5" (the same length as one hex placed on its side).
[[File:elevation.png | frame |Right| ]]
Elevation can be used to give Units a strong advantage in combat. Elevation is a factor when choosing where to move or where to attack from. The game has a total of 5 different elevations. Starting from the lowest to the highest;  -2, -1, 0, +1, +2, +3. Ground level is represented by 0. This is were all engagements take place unless otherwise stated by the mission or terrain.
 
Each level of elevation is 4.5 inches below/above the previous/next level. This can easily be measured by placing an Action Base 4/5 on its corner vertically. Everything below that height is on 0 elevation (Ground Level).


Units traveling to higher elevations use 2 Movement Points to do so while Units traveling to lower elevations only use a single Movement Point. A Unit's elevation is determined by where a Mech Unit's waist [where its legs connect] or a Vehicle Unit's cockpit is. This also applies to structures and natural terrain.
Units traveling to higher elevations use 2 Movement Points to do so while Units traveling to lower elevations only use a single Movement Point. A Unit's elevation is determined by where a Mech Unit's waist [where its legs connect] or a Vehicle Unit's cockpit is. This also applies to structures and natural terrain.
<br clear=all>
<br clear=all>
===== High Ground Bonus =====
==== High Ground Bonus ====
{| class="wikitable" style="float:left; margin-right:10px;"
{| class="wikitable" style="float:left; margin-right:10px;"
|- style="font-weight:bold;"
|- style="font-weight:bold;"
Line 697: Line 501:
| style="text-align:center;" | +2 to Accuracy Rolls
| style="text-align:center;" | +2 to Accuracy Rolls
|}
|}
When an attacking Unit is on a higher elevation than its target, that Unit receives a High Ground Bonus (HGB). This bonus is determined by the difference in elevations
When an attacking Unit is on a higher elevation than its target, that Unit receives a High Ground Bonus (HGB). This bonus is determined by the difference in elevations between the attacking Unit and its target. Units attacking a target at higher elevations do not gain the HGB.
<br clear=all>
<br clear=all>


==== Hex Colors ====
=== Hex Colors and Effects ===
{| class="wikitable" style="text-align:center; vertical-align:middle; background-color:rgba(249, 249, 249, 0.67); color:#222;"
{| class="wikitable" style="text-align:center;"
|- style="font-weight:bold; background-color:#EEE;"
|-
! Name
! Name
! Represents
! Represents
! Description
! Description
! Effect
|-
|-
| Grey
| Grey
| /
| Road or any generic flat land.
| style="background-color:rgba(249, 249, 249, 0.67); color:#222; text-align:left;" | The default hex. This hex represents nothing more than a place to stand/move on.
| style="text-align:left;" | The default hex. This hex represents nothing more than a place to stand/move on.
| style="text-align:center;" | -
|-
|-
| Red
| Red
| /
| Lava
| style="background-color:rgba(249, 249, 249, 0.67); color:#222; text-align:left;" | Indicates a space that cannot be moved to. However, movement above or below these is still possible.
| style="vertical-align:middle; background-color:rgba(249, 249, 249, 0.67); color:#222; text-align:left;" | An extremely hot tile, either lava or some other superheated material dangerous even to ExMac units and vehicles.  
| style="text-align:center;" | Causes the '''Overheat''' status effect when ending your turn on the tile.  
|-
|-
| Tan
| Tan
| style="vertical-align:middle; background-color:rgba(249, 249, 249, 0.67); color:#222;" | Desert Area
| Desert Area
| style="text-align:left;" | A baren area/landscape where little to no precipitation occurs. Units have a hard time dealing with the sand unless properly outfitted. Gives the Overheat Status Effect.
| style="text-align:left;" | A barren area/landscape where little to no precipitation occurs.
|-
| style="text-align:left;" | Any '''Move''' action costs +1 Movement point per hex. '''Thruster''' and '''Flight''' moves are not affected .
| Green
| style="vertical-align:middle; background-color:rgba(249, 249, 249, 0.67); color:#222;" | Wooded Area
| style="text-align:left;" | Trees cover the land providing concealment but not cover. Gives the Conceal Status Effect.
|-
|-
| White
| White
| Snowy Area
| Snowy Area
| style="text-align:left;" | A blanket of white covers the area. Cold winds and mechanical problems are plenty. Unless properly outfitted, expect issues. Gives the Freeze Status Effect.
| style="text-align:left;" | A blanket of white covers the area. Cold winds and mechanical problems are plenty.
| style="text-align:left;" | Any '''Move''' action costs +1 Movement point per hex. '''Thruster''' and '''Flight''' moves are not affected .
|-
| Green
| Wooded Area
| style="text-align:left;" | Trees and foliage cover the land.
| style="text-align:left;" | -1 to Accuracy rolls for every green hex within the Unit's Line-of-Sight to its target. This effect stacks on itself. If a Unit is on the hex, they gain the '''Conceal''' status Effect.
|-
|-
| Black
| Black
| Fallen / Burning Structures
| Ruined Structures
| style="text-align:left;" | Piles of concrete and metal litter the area. What used to be structures that touched the sky now hug the ground. Gives the Black Smoke Status Effect.
| style="text-align:left;" | Piles of concrete and metal litter the area. What used to be structures that touched the sky now hug the ground. Dense black smoke emanates from the rubble.
| style="text-align:left;" | Movement Point cost required to move through a black hex is doubled. -1 to Accuracy rolls for every black hex within a Unit's Line-of-Sight to its target.
|-
|-
| Light Blue
| Light Blue
| Shoreline / Shallow Ocean
| Shallow Ocean
| style="text-align:left;" | Body of water. Shallow enough to see the bottom yet deep enough to completely lose a Unit to the seas. Gives the Submerged Status Effect.
| style="text-align:left;" | Body of water. Shallow enough to see the bottom yet deep enough to completely lose a Unit to the seas.
| style="text-align:left;" | As soon as a Unit moves on/over this hex, unless they have the Swim/Cruise System, they gain the '''Euphotic''' status Effect.
|-
|-
| Dark Blue
| Dark Blue
| Deep Ocean
| Deep Ocean
| style="text-align:left;" | Body of water. Can no longer see the bottom. How many Units have been lost down there... Gives the Abyss Status Effect.
| style="text-align:left;" | The lowest body of water a Unit can go. There is no light, the pressure is extreme, and the tempatures are near freezing.
| style="text-align:left;" | As soon as a Unit moves on/over this hex, unless they have the Swim/Cruise Sytsem, they gain the '''Abyss''' status Effect.
|}
|}


==== Buildings and Structures ====
=== Buildings and Structures ===
{| class="wikitable" style="text-align:center; float:right; margin-left: 10px;"
 
|- style="text-align:left;"
[[File:Defense structure chart.png| frame | right ]]
! colspan="7" style="text-align:center; font-weight:bold; font-size:26px; font-family:Arial, Helvetica, sans-serif !important; background-color:#9aff99;" | Structure Defense Chart
 
|- style="font-family:Arial, Helvetica, sans-serif !important; background-color:#9aff99;"
Structures can be destroyed to aid or hinder player tactics. Buildings/structures do not need to be placed on black hexes. However, when they are destroyed the hex/hexes they occupy then become a black hex. The chart on the right shows how building Defense is calculated. Some buildings are tall enough that they reach a higher elevation. You can tell by placing a standard hex on its corner. If it's taller than the hex (4.5"), it's on a higher elevation.
| rowspan="5" style="vertical-align:middle; font-weight:bold; font-size:16px; background-color:#ffce93; color:#333333;" | Elevation
 
| style="font-weight:bold; background-color:#ffce93; color:#333333;" | 3
When firing at a structure, you are guaranteed a successful hit and do not need to roll for Accuracy. Base Damage is applied as normal. If an attack is made that doesn't completely destroy the building/structure, that damage is subtracted from the building/structure's total Defense. If you wish to attack a Unit through a structure, you will first need to destroy it and then make a separate attack targeting the intended Unit.
| 32
 
| 34
| 36
| 38
| 40
|- style="font-family:Arial, Helvetica, sans-serif !important;"
| style="font-weight:bold; background-color:#ffce93; color:#333333;" | 2
| style="background-color:#9aff99;" | 24
| style="background-color:#9aff99;" | 26
| style="background-color:#9aff99;" | 28
| style="background-color:#9aff99;" | 30
| style="background-color:#9aff99;" | 32
|- style="font-family:Arial, Helvetica, sans-serif !important;"
| style="font-weight:bold; background-color:#ffce93; color:#333333;" | 1
| style="background-color:#9aff99;" | 16
| style="background-color:#9aff99;" | 18
| style="background-color:#9aff99;" | 20
| style="background-color:#9aff99;" | 22
| style="background-color:#9aff99;" | 24
|- style="font-family:Arial, Helvetica, sans-serif !important;"
| style="font-weight:bold; background-color:#ffce93; color:#333333;" | 0
| style="background-color:#9aff99;" | 8
| style="background-color:#9aff99;" | 10
| style="background-color:#9aff99;" | 12
| style="background-color:#9aff99;" | 14
| style="background-color:#9aff99;" | 16
|- style="font-weight:bold;"
| style="font-family:Arial, Helvetica, sans-serif !important; background-color:#ffffff; font-weight:normal;" |
| style="background-color:#c0c0c0;" | 1
| style="background-color:#c0c0c0;" | 2
| style="background-color:#c0c0c0;" | 3
| style="background-color:#c0c0c0;" | 4
| style="background-color:#c0c0c0;" | 5
|- style="text-align:left; background-color:#c0c0c0;"
| style="font-family:Arial, Helvetica, sans-serif !important; background-color:#ffffff;" |
| colspan="6" style="text-align:center; font-weight:bold; font-family:Arial, Helvetica, sans-serif !important;" | Hexes Occupied
|}
Structures can be destroyed to aid or hinder player tactics. Buildings/structures do not need to be placed on black hexes. However, when they are destroyed the hex/hexes they occupy then become a black hex. The chart on the right shows how building defense is calculated. Some buildings are tall enough that they reach a higher elevation. You can tell by placing a standard hex on its corner. If it's taller than the hex (4.5"), it's on a higher elevation.


When firing at a structure, you are guaranteed a successful hit and do not need to roll for Accuracy. Base damage is applied as normal. If an attack is made that doesn't completely destroy the building/structure, that damage is subtracted from the building/structure's total defense. If you wish to attack a Unit through a structure, you will first need to destroy it and then make a separate attack targeting the intended Unit.




<blockquote style="background-color: lightgrey; border: solid thin grey;">
<blockquote style="background-color: lightgrey; border: solid thin grey;">
*The building you want to attack through is occupying 1 hex and is in +1 elevation. This means it has a total defense of 20.
*The building you want to attack through is occupying 1 hex and is in +1 elevation. This means it has a total Defense of 20.
:: If your total damage is less than 20, the building still stands with its remaining defense left over. If your total damage is more than 20, the building falls and you may then target the enemy Unit on the other side with a new attack.
:: If your total damage is less than 20, the building still stands with its remaining Defense left over. If your total damage is more than 20, the building falls and you may then target the enemy Unit on the other side with a new attack.
* NOTE: Since excess damage doesn't pass through the structure, it is advised that you make only the necessary amount of shots needed to bring it down so you still have some attacks for the enemy.
* NOTE: Since excess damage doesn't pass through the structure, it is advised that you make only the necessary amount of shots needed to bring it down so you still have some attacks for the enemy.
</blockquote>
</blockquote>
=== Non-Hex Terrain ===
This terrain is also known as Scatter Terrain. Pieces of Terrain that aren't connected to a hex or hex effect. They may be for decoration or may be used for cover. When building the map come to an agreement with your opponent on which will grant cover and which is purely decorative.


== Battles ==
== Battles ==
Line 811: Line 589:
| 1800
| 1800
|-
|-
| Conflagration
| Battle
| 2500
| 2500
|}
|}
;1. '''Selecting a Engagement Size'''
;1. '''Selecting a Engagement Size'''
: Players must first choose an engagement size they wish to play: Scouting, Skirmish, Operation, or Conflagration. This determines the Deployment Cost available for each team.
: Players must first choose an engagement size they wish to play: Scouting, Skirmish, Operation, or Conflagration. This determines the Deployment Cost available for each team.


;2. '''Choosing a Mission'''
;2. '''Choosing a Mission'''
Line 827: Line 600:
{| class="wikitable" style="font-weight:bold; text-align:center; display: inline-table;"
{| class="wikitable" style="font-weight:bold; text-align:center; display: inline-table;"
|-
|-
! colspan="2" style="background-color:#9b9b9b;" | Scouting Missions
! colspan="2" style="background-color:#9b9b9b;" | Scouting
|- style="background-color:#efefef;"
|- style="background-color:#efefef;"
| D8
| D8
Line 833: Line 606:
|- style="font-weight:normal;"
|- style="font-weight:normal;"
| 1-4
| 1-4
| Reconnaissance
| [[Reconnaissance]]
|- style="font-weight:normal;"
|- style="font-weight:normal;"
| 5-8
| 5-8
| Show of Force
| [[Show of Force]]
|}
|}
{| class="wikitable" style="text-align:center; display: inline-table;"
{| class="wikitable" style="text-align:center; display: inline-table;"
|- style="font-weight:bold;"
|- style="font-weight:bold;"
! colspan="2" style="background-color:#9b9b9b;" | Skirmish Missions
! colspan="2" style="background-color:#9b9b9b;" | Skirmish
|- style="font-weight:bold; background-color:#efefef;"
|- style="font-weight:bold; background-color:#efefef;"
| D8
| D8
Line 846: Line 619:
|-
|-
| 1-2
| 1-2
| Winds of War
| [[Winds of War]]
|-
|-
| 3-4
| 3-4
| Endless Pursuit
| [[Endless Pursuit]]
|-
|-
| 5-6
| 5-6
| Counterattack!
| [[Counterattack!]]
|-
|-
| 7-8
| 7-8
| The Call of Darkness
| [[The Call of Darkness]]
|}
|}
{| class="wikitable" style="text-align:center; display: inline-table;"
{| class="wikitable" style="text-align:center; display: inline-table;"
|- style="font-weight:bold;"
|- style="font-weight:bold;"
! colspan="2" style="background-color:#9b9b9b;" | Operation Missions
! colspan="2" style="background-color:#9b9b9b;" | Operation
|- style="font-weight:bold; background-color:#efefef;"
|- style="font-weight:bold; background-color:#efefef;"
| D8
| D8
Line 865: Line 638:
|-
|-
| 1-2
| 1-2
| The Order to Destroy
| [[The Order to Destroy]]
|-
|-
| 3-4
| 3-4
| Emissary of Darkness!
| [[Emissary of Darkness!]]
|-
|-
| 5-6
| 5-6
| Burning Sandstorm
| [[Burning Sandstorm]]
|-
|-
| 7-8
| 7-8
|  
| [[Protect the Relic]]
|}
|}
{| class="wikitable" style="font-weight:bold; text-align:center; display: inline-table;"
{| class="wikitable" style="font-weight:bold; text-align:center; display: inline-table;"
|-
|-
! colspan="2" style="background-color:#9b9b9b;" | Conflagration Missions
! colspan="2" style="background-color:#9b9b9b;" | Battle
|- style="background-color:#efefef;"
|- style="background-color:#efefef;"
| D8
| D8
Line 884: Line 657:
|- style="font-weight:normal;"
|- style="font-weight:normal;"
| 1-4
| 1-4
|  
| [[Protect the Base]]
|- style="font-weight:normal;"
|- style="font-weight:normal;"
| 5-8
| 5-8
|  
| [[Marshall Law]]
|}
|}
</center>
</center>
Line 903: Line 676:


;7. '''Determine who is Attacker and Defender'''
;7. '''Determine who is Attacker and Defender'''
: Players roll 1D8 to determine this. The highest value chooses who will be Attacker and Defender. The Attacker goes first in the engagement but the Defender chooses their deployment area.
: Players roll 1D8 to determine this. The highest value chooses who will be Attacker and Defender. The Attacker goes first in the engagement but the Defender chooses their Deployment Area.


;8. '''Choose a Deployment Area'''
;8. '''Choose a Deployment Area'''
Line 909: Line 682:


;9. '''Deploy Squads'''
;9. '''Deploy Squads'''
: Squad deployment is done in alternating order. The player who moves first places down one Unit from their squad into the Deployment Area. Then the player who moves second does the same. This repeats until all Units are on the field.
: Squad deployment is done in alternating order. Check [[Core_Rules#Deployment]] for more information. There may be more specific rules in the mission briefing.


;10.'''Begin the Battle'''
;10.'''Begin the Battle'''
:
: Resolve any pre-battle rules then begin activation with the Attacker's first unit.


;11.'''End the Battle'''
;11.'''End the Battle'''
:
: The battle ends when the number of turns pass in the mission briefing or all of one side's units have become destroyed or inoperable.


;12.'''Determine the Victor'''
;12.'''Determine the Victor'''
: Each player can score a maximum of 7 points from primary objectives and a maximum of 7 points from secondary objectives for a total of 14 possible points (any excess victory points awarded are discounted).
: Each player can score a maximum of 7 points from primary objectives and a maximum of 7 points from secondary objectives for a total of 14 possible points (any excess victory points awarded are discounted).
=== Scouting Missions ===
{| class="wikitable" style="font-weight:bold; text-align:center; display: inline-table;"
|-
! colspan="2" style="background-color:#9b9b9b;" | Scouting Missions
|- style="background-color:#efefef;"
| D8
| Mission
|- style="font-weight:normal;"
| 1-4
| Reconnaissance
|- style="font-weight:normal;"
| 5-8
| Show of Force
|}
==== Reconnaissance ====
<div class="mw-collapsible mw-collapsed" data-expandtext="Reconnaissance" data-collapsetext="hide me">
;<u>Mission Intel</u>
:
[[File:1v1missions.png| 500px| right| ]]
; <u>Mission Rules</u>
:Secure and Defend: Any Unit that stands adjacent to an objective marker takes control of it until an enemy Unit takes control of it by moving adjacent to it. If a player controls an objective marker at the end of the round, it remains in their control even if they have no models within range of it. If both players have a Unit adjacent to an objective marker, control is given to the player with more Units adjacent to it. In the case of a tie, the previous owner of the objective marker retains control.
;<u>Primary Objective</u>
:Points are awarded for controlling objective markers as follows: At the beginning of a player's turn, they score 1 point for each of the following conditions they satisfy:
*They control one or more objective markers.
*They control two or more objective markers.
*They control more objective markers than their opponent controls.
''Primary objective cannot be scored in the first round.''
</div>


== Terminology ==
== Terminology ==
Line 969: Line 708:
|-
|-
| Critical Hit
| Critical Hit
| style="text-align:left;" | Adds 1/2 of the Weapon's base damage as bonus damage (round up).
| style="text-align:left;" | Adds .5 of the Weapon's Base Damage as bonus damage (round up).
|-
| On-Target
| style="text-align:left;" | After an Accuracy/Assault Roll is successful but an Evasion Roll has yet to be conducted.
|-
|-
| Classification
| Classification
Line 1,008: Line 750:
|-
|-
| Fall Damage
| Fall Damage
| style="text-align:left;" | 3 x elevation height in damage to both legs on a Mech Unit or the cockpit on a Vehicle Unit.
| style="text-align:left;" | 2 ( Unit Classification * Elevation Height) to any Core Section that Unit chooses.
|-
| Collision Damage
| style="text-align:left;" | 2 ( Moving Unit Classification * Thrown Distance)
|-
| Throw Distance
| style="text-align:left;" | Attacker Classification - Defender Classification + 2
|-
|-
| Systems
| Systems
Line 1,025: Line 773:
| style="text-align:left;" | Any and all parts that make up the CORE of the unit- limbs and the armor attached to those limbs. e.g. head, head armor, chest, knee armor, etc.
| style="text-align:left;" | Any and all parts that make up the CORE of the unit- limbs and the armor attached to those limbs. e.g. head, head armor, chest, knee armor, etc.
|-
|-
| Core Sections
| Unit Sections
| style="text-align:left;" | Core parts that are grouped into individual sections. EG; Head, Arms, Legs, Torso, etc.
| style="text-align:left;" | Core parts that are grouped into individual sections. EG; Head, Arms, Legs, Torso, etc.
|-
|-
Line 1,036: Line 784:
| S.R.M.
| S.R.M.
| style="text-align:left;" | Stat Reduction Modifiers. This number reperesents how many times a Unit's base stats can be lowered to a minimum of 2 Accuracy, 2 Assault, and 2 Evasion.
| style="text-align:left;" | Stat Reduction Modifiers. This number reperesents how many times a Unit's base stats can be lowered to a minimum of 2 Accuracy, 2 Assault, and 2 Evasion.
|-
| Hex Group
| style="text-align:left;" | Hexes of the same color that directly touch one another.
|-
|-
| Main Unit
| Main Unit
| style="text-align:left;" | Refers to a single Unit that controls drones.  
| style="text-align:left;" | Refers to a single Unit that controls drones.  
|}
|}


{{CoreNavigation}}
{{CoreNavigation}}
[[Category:Rules]]
[[Category:Rules]]

Latest revision as of 19:08, 4 March 2024

Introduction

The 30 Minute Missions: Wargame is an asymmetrical wargame played by 2+ players with an Attacker team and Defender team. The game can be played by any number of players but must remain in the Attacker and Defender style unless otherwise stated. Teams do not have to have the same number of players.

You can play alone similar to how one would play themselves in chess, but it is not recommended.

Combat Objective

The game is won after the main objective of the mission you are playing has been completed. These range from holding an objective for multiple turns or getting an object and moving to your side of the board.

Required Components

Dice

It is recommended that you have at least 1 eight-sided dice (D8), but having multiple will make it so you can roll all of your attacks at once instead of one at a time. It is also advised that you have a twenty-sided dice (D20) on hand for each unit to use to keep track of how many Action Points a Unit has, however a piece of paper will do as well.

If a rule requires a D8 roll 3 or higher, this is often abbreviated as 3+.

Objective Markers

Objective Markers can be anything as long as they fit on a hex and do not interfere with the movement of most units. There will be cases where a unit takes up a whole hex or will otherwise cause an issue with the token. In those cases make a mark of where the token was on a piece of paper or other notation.

Tokens

While playing the game, you may need various tokens to identify a status effect or elevation.

Units

Described in greater detail later. Units mean the 1/144 scale models built using 30mm Parts. Other models in the same scale may be used as well. We suggest a minimum of 1 unit per person playing. However without a points balance this may skew combat in favor of one player over the other.

Datasheet

The Datasheet contains your unit's information. Defense, Weapons, and other special abilities will all be listed here. More information is found on the Unit Datasheet Creation page.

Unit Information

Units are the giant robots (mechs) and vehicles used and while any thing can be used the game is designed with primarily with 30 Minute Mission parts in mind .

Unit Sections

When a player is creating their Unit, they need to determine its Unit Sections. Unit Sections (US) are groups of individual parts combined to form specific areas that perform a certain function. First, a player needs to determine what type of Unit they created. Whether it be a Mech or a Vehicle each type has different Unit Sections available to it with many being used by the other types. Drones, which may be a Mech Unit, Vehicle Unit, or Equipment, may also require some of these Sections depending on build. Determine what Sections are needed for your Unit type by their movement requirements.

Battlefield Layout

Unit Sections:

  • Head - The upper part of a Mech Units body. Contains complex camera systems to provide visuals to the pilot in real-time.
  • AI Cockpit - Main Section of a Drone/Mech/Vehicle. Contains the A.I. pilot.
  • Torso - Main Section of a Mech Unit. Holds the pilot.
  • Cockpit - Main Section of a Vehicle. Holds the pilot.
  • Arm - The upper limb of a Mech Unit. Has the ability to pick up/hold/carry various things.
  • Tail - A modified arm, usually used for stability and aesthetics. May have weapons or thrusters attached to it.
  • Leg - Each of the limbs on a Unit that provides movement.
  • Aquatic Drive - A section that provides movement in Water and Deep Water Tiles. Requires for Aquatic vehicles.
  • Aerial Drive - A Section that provides flight in some form either for hovering or actual flight. It is a requirement for Aerial Vehicles.
  • Terra Drive - A Section that provides movement across the ground. It grants standard movement and is a requirement for Terrestrial Vehicles.

Next, Identify how many Sections your Unit has and what each one is. Mech Units normally have a head, two arms, two legs, as well as a Torso. Vehicle Units normally have at least one Drive Section and a Cockpit. Drones normally have a single AI Cockpit Section. All of these may vary depending on how you build your Units.

Unit Types

Units are divided into the following Types:

Mech

A unit that meets any of the following guidelines:

  • Uses legs as its main form of transportation
  • Has or relies on arms to perform its primary functions
  • Has a clear and obvious torso

This is the standard Engagement Unit.

Vehicle

Any Unit that relies on jet propulsion, wheels, tracks/treads, or rotors as its primary source of movement and doesn't have any form of arms. Any part that isn't part of a Drive Core Section, weapon, or equipment is considered part of the Cockpit Core Section.

All Vehicle types gain the following changes to their gameplay:

  • Must have a Cockpit Unit Section in place of a Torso Unit Section.
  • When checking line of sight (LoS), the reference point starts at the Units cockpit.
  • Cannot physically pick up or interact with any objects.
  • Cannot change elevation [+/-] without appropriate Abilities.
  • Cannot obtain the Jump Ability.

Vehicles are broken down into 3 categories: Terrestrial, Aerial, and Aquatic. Each one has specific requirements that must be met in order for a vehicle to be considered one or the other. Below is each category along with its Requirements, Restrictions, and Bonuses.

Terrestrial

Land-based vehicles.

Any Unit that meets the following requirements are to be regarded as a Terrestrial Vehicle Unit:

  • Must contain at least two Terra Drive Unit Sections.
  • Does not contain Flight Drive Unit Sections.
  • Does not contain Aquatic Drive Unit Sections.

The following are restrictions that a Terrestrial Unit must follow:

  • Weapon range is halved when firing through green hexes.
  • Movement costs 2x when traveling over green hexes.

The following bonuses are given to Terrestrial Vehicles:

  • FoV is all 6 hexes around the Unit (360 degrees).
  • Main Cannon has an AP reduction of 3 (to a minimum of 4).
Aerial

Usually a plane, helicopter, or other vehicle for flying in appearance.

Any Unit that meets the following requirements are to be regarded as an Aerial Vehicle Unit:

  • Must contain at least one Flight Core Part
  • Does not contain Aquatic Drive Unit Sections.
  • Does not contain Terra Drive Unit Sections.

The following are restrictions that an Aerial Unit must follow:

  • Cannot move on 0 Elevation (Ground Level).
  • Can only use thruster movement.
  • All movement points must be used during activation. Failure to do so will result in Unit taking fall damage to Cockpit Unit Section.
  • Standard movement is an exclusive Command Action that can only be gained with the use of rotor parts.

The following bonuses are given to Aerial Vehicles: Strafing runs: When the unit passes directly over enemy units (a single elevation directly above) during the movement phase, it may pause its movement and conduct a single ranged combat or close combat attack. After the attack has been resolved, the unit can continue with its movement phase. This can be repeated.

Aquatic

Usually a boat, submarine, or other vehicle for navigating the water.

Any Unit that meets the following requirements are to be regarded as an Aquatic Vehicle Unit:

  • Must contain at least one Aquatic Drive Unit Section.
  • Must not contain Terra Drive Unit Sections.
  • Must not contain Aerial Drive Unit Sections.

The following are restrictions that an Aquatic Unit must follow:

  • Can only move over light/dark blue hexes.

The following bonuses are given to Aquatic Vehicles:

  • Attacks made with missile pods don't need LoS.

Drone

Drones are typically smaller units or equipment controlled by a larger or more networked unit. Drones can be either mechs OR vehicles.

There are two categories of Drones:

  • A.I. Drones
  • Non-AI Drones

A.I. Drones:

AI Drones are drones that are controlled by artificial intelligence. These are considered their own Units and as such, get their own Datasheet. The pilot for this Unit must be an AI and can be selected when choosing the rank/AI.

Non-A.I. Drones:

Non-AI Drones are drones that need to be controlled by a Main Unit with the Control Management Mod.

Classification

Total Defense Classification Base Movement Base Action Points
0 - 75 Class 1 5 1d8 + 2
76 - 150 Class 2 4 1d8 + 2
151 - 225 Class 3 3 1d8 + 3
226 - 300 Class 4 2 1d8 + 4
301+ Class 5 1 1d8 + 4

There are 5 different classifications that provide different starting bonuses and limitations based on the size of your Unit. This is determined by the Total Defense value of all of Core Parts combined.

Squads

Are groups of units usually no more than 5 as a game of 6 or more can become longer and slow down the game. These are generally called Lances or Fire Teams depending on size and your own preferences.

Datasheets

Datasheets show detailed stats and abilities for each Unit. You will need to create a Datasheet for every Unit in your Squad. Which instructions for can be found Unit Datasheet Creation.

Gameplay

Battlefield Layout

Board Setup

All Missions take place on a battlefield overlayed by a hexagonal grid. Each hex space is the same size as an action base 4/5 - 4.5 inches. This eliminates the need for measuring tools and makes movement/weapon ranges easier to calculate.

However, if a person wishes to play without hexes all movement can be done with action bases and movement being 4.5 inches per movement point.

A full-sized battlefield measures 14 hexes (58.5 in) on the long side by 11 hexes (38.3 in) on the short side, with the flat sides facing each player.

Missions will give suggestions on more specific terrain setups. It is suggested a matching terrain setup for each side when playing a destroy all targets type mission.


Pre-Deployment

Players roll 1D8 to determine who goes first. The higher roll chooses who gets to be Attacker and who gets to be Defender. The Attacker goes first and has starting initiative, but the Defender chooses their Deployment Area.

In 3+ player games, players choose which team to participate on and share Units and turns with their teammates. At the start of the round players roll for initiative with the higher roll, giving the first chance to move a unit.

Deployment

Once the attacker and defender have been selected, it is now time for the players to deploy their squads to the battlefield. Each side has a dedicated Deployment Area laid out in the mission details. Standard Deployment Areas are the first 3 hexes from the short side table edge on both sides.

Starting with the attacker, they will place one Unit within their Deployment Area on any elevation/terrain they see fit. If their Unit flies/swims, they may start in the air/water but must place a token down notating its elevation. Once the attacker's Unit has been deployed, the defender does the same. In an alternating fashion, both players continue to deploy Units until everyone is on the battlefield. If a player has any Units in reserve [Tentative name change] place them off to the side until given orders to deploy.

After both sides have deployed their Units, the Deployment Phase has ended and the beginning of the Round can begin.

Rounds

Then the player with initiative activates a Unit which starts the Unit's turn. A turn consists of three phases in order: Movement Phase, Ranged Combat Phase, and then Close Combat Phase. Units can only be activated once per Round. After the unit has completed its turn the next player with initative may activate a unit. This continues until all players have activated a unit then the player who started the round may activate another unit. If a player has no Units left to act with, they skip their turn. Once all players have run out of Units with available turns, that Round is over. When the Round is over, a new Round begins with the same player starting first. This continues until the Mission is completed or a player surrenders.

When a Unit has been activated, place down an Activation token next to the Unit. Once the Unit has finished its turn, flip the token over to Inactive. This indicates that the Unit has already been activated during that round and cannot be activated again. When a new round begins, remove all Inactive tokens from the battlefield.

Phases of a Turn

Phases of a turn are sequential

Each turn is separated into 3 phases; Movement Phase, Ranged Combat Phase, and the Close Combat Phase. When the player activates a Unit, that Unit must act in each phase sequentially. They are allowed to skip over phases but they cannot go back to a prior or skipped phase afterward.

Movement Phase

Steps:

1. Choose a Unit to Activate
2. Roll AP
3. Move the Unit
Active Token

Choose a Unit to activate then the Movement Phase begins. First, place down an Active Token next to the Unit The token is to keep track of which Units have already been activated during that turn. Then roll 1D8 to see how many Action Points the Unit can add to its Base AP. Action Points can be used throughout that Unit's turn on Attacking or Command Actions. Any Action Points that do not get used are stored and can be used in future turns. This is capped at 16 AP per Unit. Place a D20 next to the Unit to keep track of its stored AP.

Next, a Unit may take a Move action. There are multiple types of movement based on the capacity of the unit. A unit may move onto one of the three hexes within the Units Field of View (represented by Fig 3). When using a unit that sits on multiple hexes rotate and move from the lead hex of the unit where the Field of Vision (FoV) originates.

Standard Movement: Moving a Unit normally based on the Standard Movement stat available to its Classification. Units may rotate around on the same hex to change their Field of View at the cost of 1 Standard Movement Point. Once per Movement Phase, a Unit can rotate freely around on the same hex without having to use a Standard Movement Point. Units cannot see beneath their elevation or behind themselves unless otherwise stated. When moving up an elevation the movement costs 2 Standard Movement Points. While moving in water it costs 2 Movement Points to leave the water and 2 Movement Points to move between hexes.

Thruster Movement: The Thruster Movement stat doubles the Units Standard Movement. The direction of travel is linear and must move the full amount listed. Only available to use when the Unit has any thrusters attached.

Movement Options

When a Unit meets the required amount of thruster durability, they have the option to use the following movement options. Use the chart below to determine which option is available to your Unit.

Hover: Using this movement may gain or lose 1 elevation per turn with the cost of a Standard Movement Point. This Unit may be in the air without support without falling. However, it must keep its Thruster Durability above the cost labeled below or it will lose the Hover Movement Action. If the Unit loses enough Thruster Durability to have it lose the Hover Move Action then it falls to the ground taking fall damage. When falling move the unit to the ground and take fall damage immediately after the damage was dealt. Otherwise, this is the same as a Standard Move.

Flight: Using this movement may gain or lose as many elevations per turn as it has Movement Points. Otherwise, this is the same as a Standard Move. This Unit may end its Movement Phase in the air without support and without falling. However, it must keep its Thruster Durability above the cost labeled below or it will lose the Flight Movement Action. If it loses the Flight Move Action but still has the Hover Move Action then it does not fall to the ground and instead is still considered to be in the air. Otherwise, this is the same as a Standard Move.

Cruise: In Water Tiles, the Cruise Move Action only costs 1 Move Action Point to move from one tile to the other. If a unit moves underwater it costs 2 Move Points, and the unit requires 2 Movement Points to move from one elevation in the Water Tile to the other. Moving out of the water to the land only costs 1 Move Point, however, if the unit does not have the Standard Movement action it costs 3 points to move on non-Water Tiles.

Swim: In Water Tiles, the Swim Move Action only costs 1 Move Action Point to move from one tile to the other. If a unit moves underwater it costs 1 Move Point, and the unit requires 1 Movement Point to move from one elevation in the Water Tile to the other. Moving out of the water to the land only costs 1 Move Point, however, if the unit does not have the Standard Movement action it costs 3 points to move on non-Water Tiles.

Movement options.png


Fig 3a on the left shows a Top-Down perspective of a Unit's Field of View while fig 3b on the right shows a Side-View perspective with an elevation higher and lower than the Unit. Arrow indicates directional movement.


Movement Within a Hex: Depending on the size of each Unit and the terrain it's on, you may find that you have a fair bit of room inside the hex your Unit resides on. Your Unit may move around freely inside the hex as long as 80% of the Unit is inside and is facing the direction it stopped in. You may use this to set up ambushes/ firing positions/ or take better cover.

Two friendly Units may occupy the same hex as long as they do not physically overlap with one another. Two Units on opposing sides cannot occupy the same hex unless stated otherwise or one is on another elevation from the other.

Fig 4a on the left shows allied Units 80% within the hex upon which they are standing and multiple Units on the same hex that are not overlapping. Fig 4b on the right shows opposing Units occupying the same hex, Units that are more than 80% outside their respective hex, and multiple friendly Units overlapping on the same hex.

Combat

Steps:

1. Determine if Target Unit is in Line of Sight
2. Select Core Part or Equipment to target
3. Select a Weapon to attack with and measure Range
4. Roll Attack
5. Roll Evasion
6. Allocate Damage

Choose a target that is within your Unit's Field of View (FoV) and Line of Sight (LoS).

FoV is determined by the first three hexes in front of your Unit in the direction it's facing- a Unit's Field of View includes all unobstructed hexes past those first three hexes. LoS is determined by using a straight line directly from the head of your Unit to the target. The Unit's Weapon must also have a clear LoS. If you can clearly see 80% the part you want to attack you may do so. If a unit takes up multiple hexes use the most lead hex to determine FoV.

The image depicts which Core Sections of the Alto (in red) are exposed when it's behind various pieces of cover. Left: Head, Torso, Left Arm, and Left Leg. Right: Head, Left and Right Arms, and Torso.

After you have determined the Unit is within view check the Range stat of the weapon you wish you use. Measure the range from the first hex in front of the Attacking Unit to the Target Unit. If the Target Unit is a distance under or equal to the Range stat then you may complete the attack. Measuring for this may be done at any time as long as it doesn't slow down gameplay.

Order of operations for Attack Rolls

Attacking is resolved with D8 rolls using the three stats: Accuracy, Assault, and Evasion. The player needs to roll equal to or higher than the Modified value shown on the Unit's Datasheet for every attack being made.

  • Accuracy is used in Ranged Combat to determine a Unit's chances of hitting its target with a Ranged Weapon.
  • Assault is used in Close Combat and determines a Unit's chances of hitting its target with a Melee Weapon.
  • Evasion is used throughout combat and determines the chances a Unit has of dodging incoming attacks.

While making attacks Attacking Units will use their Accuracy or Assault stat. If the Attack is a success then the Defending Units will use their Evasion stat. Rolls can be modified by temporary buffs/debuffs during Engagements while stats can be modified permanently via SMTs on the Unit's Datasheet. For a detailed breakdown of how combat is resolved specifically, see Combat Phases.

If the weapon succeeded its Attack Roll and the Evasion Roll of the Defending Unit failed then deduct the Damage of the stat from the Durability of the Core Part or piece of Equipment that was Targeted. If that Part was destroyed then it is considered Inoperable and may no longer be used in the game. Core Parts being destroyed have detrimental effects on the Unit as detailed later.

Critical Hits: Critical Hits are rolls of 8 when making an Attack Roll. They are always considered hits regardless of other modifiers.

Critical Misses: Critical Misses are rolls of 1 when making an Attack Roll. They are always considered misses regardless of other modifiers.

Ranged Combat Phase

If a Unit chooses to take the Ranged Combat Phase then it may use any Ranged Weapon it has to attack with. Follow the steps for Combat as shown above and use the Accuracy stat for the Attack stat. If a unit depletes all of its AP before the Melee Combat Phase, the phase is skipped and the unit is moved to the Inactive state.

Close Combat Phase

The Close Combat Phase is similar to the Ranged Combat Phase with the major difference being that instead of using Ranged Weapons to attack, the Unit uses Melee Weapons. All melee weapons have a range of 1 unless otherwise stated. Instead of conducting an Accuracy Roll, the player will conduct an Assault Roll. The process listed above otherwise applies to this Phase.

Once all phases have ended, unused AP is stored using the D20, and the Active token is flipped over to the Inactive side. This signifies that the Unit cannot be activated again during that round.

Basic Attacks Every Unit can use Basic Attacks, which is the name for any unarmed strike using any limb. These attacks are done during the Close Combat Phase. These attacks are not capable of doing Critical Hits on rolls of 8. All basic attacks have the same stats regardless of classification:

  • 1 AP Cost
  • 1 Base Damage
  • 1 Range

Grappling Every Unit that has hands can Grapple. The range for a Grapple is 1 hex. Grappling can only be performed during the Close Combat Phase. To engage in a Grapple, the attacking Unit makes an Assault Roll. If successful, the enemy then makes an Evasion Roll. If the enemy passes its Evasion Roll, then the Grapple is over and the attacker can no longer engage in another Grapple against that Unit. If the enemy fails its Evasion Roll, then the Grapple is successful.

When a Unit successfully Grapples, it occupies the same hex as the enemy and is able to do one of two things: Throw or Hold the enemy.

Hold
Place a "Hold" token next to the Unit. Both Units cannot move from the hex while the Hold token exists. At the start of the next turn, the Unit Holding can attack with any Mounted Weapon or non-2H Weapon. If the Unit wishes to disengage the Grapple, they may use the Break Grapple Command Action and move to the hex they initially started the Grapple from.
While being Held, the enemy can no longer Evade incoming attacks. At the start of its next turn, it can use the Break Grapple Command Action to free itself. When used, it moves to the hex directly behind it and faces the attacker. If that hex is unavailable, it may move to one of the other hexes in its blind spot facing the attacker. If no hexes are available, the Command Action cannot be used and the turn is over. Held Units cannot use Mounted Weapons.
Throw
An enemy can only be Thrown within the FoV of the attacking Unit. Use the Throw Distance formula to determine the maximum distance the enemy can be Thrown: [8 - (attacker Modified Assault Stat)]. The attacking Unit can Throw the defending Unit anywhere within this maximum distance. Units can only be Thrown to the same elevation or lower. Units are unable to Throw other Units that have a higher Classification. Units that are Thrown to a lower elevation also take Fall Damage.
Once the attacker specifies a hex for the defending Unit to land on, they then roll for Assault. This is to check Deviation (link). Pass, the Unit goes where intended. Fail, attacking Unit rolls 1d8 for Deviation and lands there instead.
After the landing hex is determined, the defending Unit is placed on the specified hex on its back, face up, with its feet pointed at the attacker. The defending Unit receives Collision Damage [2(Defender Classification * Thrown Distance)] to its torso. While on the ground, the defending Unit cannot Evade incoming attacks. If the attacking Unit has no more AP to spend, the turn is over. On the defending Unit's next turn, it must use the GetUp Command Action to get back on its feet. Otherwise, it will remain on the ground.
Enemy Units can also be thrown into structures as well as other Units.
Thrown into another Unit
If the attacker has specified a hex for the defending Unit to land on and its path is occupied by other Unit(s), the other Unit(s) will conduct an Evasion Roll. If successful, the defending Unit lands on the specified hex same as above and the other Unit(s) are untouched. If the other Unit(s) fails its Evasion roll, they take Collision Damage as well as the defending Unit and are now on the ground. This also includes allied Units.
Thrown into a Structure
If the attacker has specified a hex for the defender to land on and it's occupied by a structure, place the defender on the same hex as the structure but not on the structure itself. Then apply Collision Damage to the defender's torso.
If the damage is less than the current Defense of the structure, the structure remains and the status effect "Stuck" is given to the Unit.
If the damage is greater than the current Defense of the structure, the structure falls on top of the Unit and the current Defense is applied as Bonus Damage to the Unit's torso. Remove the structure from the battlefield and replace it with a Black Hex. Then place the defending Unit on its back facing up with its feet facing the attacker. On the defending Unit's next turn, it must use the GetUp Command Action to get back on its feet. Otherwise, it will remain on the ground.
End of Round

Both players will take turns activating their Units and completing each phase. Once all Units have been activated the Inactive tokens are removed from every Unit and a new round begins. This continues until the Mission is completed or the turn limit has been reached.

Destroying Unit Sections

When a limb is destroyed, remove the physical section from the model* and then apply the respective status effect accordingly:

Unit Section Description
All Head Limbs Unit gains -1 to all Accuracy Rolls.
Arm Unit can no longer pick up objects or attack with Weapons in that hand. Weapons that were held are now on the ground.
All Arm Limbs Unit can no longer perform grapples. The "Break Grapple" Command Action costs 4 Actions Points.
Half Leg Limbs Unit gains -1 to Assault rolls and reduce standard movement points by 50% (rounded up). This debuff is applied once a Unit has lost half of its leg limbs (rounded up).
All Leg Limbs Unit gains -2 to Assault Rolls and standard movement points are reduced to 1. This penalty replaces the "Half Leg Limbs" penalty.

∗A player can opt out of physically removing the section from the model by placing down the respective Destroyed Limb token. Status effects still apply.

Destroyed vs Inoperative

When the Torso Durability Points or Cockpit Durability Points of a Unit are reduced to 0, the Unit is considered destroyed. If a Mech Unit's Torso Core Part remains intact but its limbs are all destroyed, it is considered Inoperative. If a Vehicle Unit's Cockpit Core Part remains intact but it loses its ability to move, it is considered Inoperative. An Inoperative Unit can continue participating in the Engagement if it still has Drones or Mounted Weapons that have not been destroyed.

There are 4 unique areas to a Standard Mech Unit:

  • Head, Torso, Arm, and Leg

For Standard Vehicles:

  • Cockpit, Body, and (wings/wheels/treads/etc).

Destroying each one results in a different penalty for that Unit.

Command Actions

Actions that can be made during a Units turn but aren’t tied to a specific phase. All Command Actions require 2 Action Points to conduct and can be used multiple times within a single turn. Command Actions (CA’s for short) are divided into 3 categories: State, Stance, & Order.

  • States are togglable actions.
  • Stances are actions that can be taken out of turn. Activating these immediately ends the Units turn.
  • Orders are actions given to drones.

Status Effects

Name Token Description
Conceal <> Unit gains +1 to their Evasion Rolls against ranged attacks.
Overheat <> Unit is immediately put into the kneeling position and ends its turn.
Freeze <> Unit ends its turn immediately. Upon its next activation, its max AP storage capacity is limited to 8.
Euphotic <> Standard Movement is reduced by 2 Movement Points.
Abyss <> Standard Movement is reduced by 2 movement points and the Unit takes 10 damage to the torso per turn.
Stuck <> The Unit is unable to move and is considered Inoperable until the stuck condition is removed.
Hold <> The Unit is being held by another unit. It may only take the Break Hold Command Action.
System Error <> Unit ends its turn immediately. Before its next activation, roll 1d8 to reboot. On a 5 or higher, the Unit continues activation per normal. On a 4 or lower, the Unit activation is canceled and its turn ends. Upon subsequent activations, the pass requirement is lowered by 1.
Airborne <> If a Unit has the Hover/Fly System, place a corresponding token (+1/+2/+3) next to them to indicate their elevation. Remove if on ground level.
Submerged <> If a Unit has the Cruise/Swim System, place a corresponding token (-1/-2) next to them to indicate their elevation. Remove if on ground level.

Terrain

Scenery on the battlefield can range from tall buildings to small rocks or trees. Some terrain features are included by individual Missions. Different terrain features are represented by different colored hexes. Each colored hex gives different advantages and/or disadvantages.

When placing terrain colors on the battlefield, different colors need to be placed at least 1 hex apart. If a color description states to place it at a specific elevation, the only elevation that it can be placed is at the Zero Elevation (unless otherwise specified by another rule).

Elevations

Elevation Description
+3 Exclusively used by Flight Types.
+2 The highest elevation which a non-flying Unit can maneuver to.
+1 The most common elevation for Units that have the ability to Fly/Hover.
0 Ground Level. All Units can be used at this elevation.
-1 The most common elevation for Units that have the ability to Swim/Cruise.
-2 The lowest point Units can reach.
Elevation.png

Elevation can be used to give Units a strong advantage in combat. Elevation is a factor when choosing where to move or where to attack from. The game has a total of 5 different elevations. Starting from the lowest to the highest; -2, -1, 0, +1, +2, +3. Ground level is represented by 0. This is were all engagements take place unless otherwise stated by the mission or terrain.

Each level of elevation is 4.5 inches below/above the previous/next level. This can easily be measured by placing an Action Base 4/5 on its corner vertically. Everything below that height is on 0 elevation (Ground Level).

Units traveling to higher elevations use 2 Movement Points to do so while Units traveling to lower elevations only use a single Movement Point. A Unit's elevation is determined by where a Mech Unit's waist [where its legs connect] or a Vehicle Unit's cockpit is. This also applies to structures and natural terrain.

High Ground Bonus

Elevation Difference High Ground Bonus Effect
0 No Bonus
1 +1 to Assault Rolls
2-3 +1 to Accuracy Rolls
4-5 +2 to Accuracy Rolls

When an attacking Unit is on a higher elevation than its target, that Unit receives a High Ground Bonus (HGB). This bonus is determined by the difference in elevations between the attacking Unit and its target. Units attacking a target at higher elevations do not gain the HGB.

Hex Colors and Effects

Name Represents Description Effect
Grey Road or any generic flat land. The default hex. This hex represents nothing more than a place to stand/move on. -
Red Lava An extremely hot tile, either lava or some other superheated material dangerous even to ExMac units and vehicles. Causes the Overheat status effect when ending your turn on the tile.
Tan Desert Area A barren area/landscape where little to no precipitation occurs. Any Move action costs +1 Movement point per hex. Thruster and Flight moves are not affected .
White Snowy Area A blanket of white covers the area. Cold winds and mechanical problems are plenty. Any Move action costs +1 Movement point per hex. Thruster and Flight moves are not affected .
Green Wooded Area Trees and foliage cover the land. -1 to Accuracy rolls for every green hex within the Unit's Line-of-Sight to its target. This effect stacks on itself. If a Unit is on the hex, they gain the Conceal status Effect.
Black Ruined Structures Piles of concrete and metal litter the area. What used to be structures that touched the sky now hug the ground. Dense black smoke emanates from the rubble. Movement Point cost required to move through a black hex is doubled. -1 to Accuracy rolls for every black hex within a Unit's Line-of-Sight to its target.
Light Blue Shallow Ocean Body of water. Shallow enough to see the bottom yet deep enough to completely lose a Unit to the seas. As soon as a Unit moves on/over this hex, unless they have the Swim/Cruise System, they gain the Euphotic status Effect.
Dark Blue Deep Ocean The lowest body of water a Unit can go. There is no light, the pressure is extreme, and the tempatures are near freezing. As soon as a Unit moves on/over this hex, unless they have the Swim/Cruise Sytsem, they gain the Abyss status Effect.

Buildings and Structures

Defense structure chart.png

Structures can be destroyed to aid or hinder player tactics. Buildings/structures do not need to be placed on black hexes. However, when they are destroyed the hex/hexes they occupy then become a black hex. The chart on the right shows how building Defense is calculated. Some buildings are tall enough that they reach a higher elevation. You can tell by placing a standard hex on its corner. If it's taller than the hex (4.5"), it's on a higher elevation.

When firing at a structure, you are guaranteed a successful hit and do not need to roll for Accuracy. Base Damage is applied as normal. If an attack is made that doesn't completely destroy the building/structure, that damage is subtracted from the building/structure's total Defense. If you wish to attack a Unit through a structure, you will first need to destroy it and then make a separate attack targeting the intended Unit.



  • The building you want to attack through is occupying 1 hex and is in +1 elevation. This means it has a total Defense of 20.
If your total damage is less than 20, the building still stands with its remaining Defense left over. If your total damage is more than 20, the building falls and you may then target the enemy Unit on the other side with a new attack.
  • NOTE: Since excess damage doesn't pass through the structure, it is advised that you make only the necessary amount of shots needed to bring it down so you still have some attacks for the enemy.

Non-Hex Terrain

This terrain is also known as Scatter Terrain. Pieces of Terrain that aren't connected to a hex or hex effect. They may be for decoration or may be used for cover. When building the map come to an agreement with your opponent on which will grant cover and which is purely decorative.

Battles

Battles are waged by following the sequence below:

Engagement Size Deployment Cost Limit
Scouting 600
Skirmish 1200
Operation 1800
Battle 2500
1. Selecting a Engagement Size
Players must first choose an engagement size they wish to play: Scouting, Skirmish, Operation, or Conflagration. This determines the Deployment Cost available for each team.
2. Choosing a Mission
Players determine which Mission will be carried out during the battle; they can only choose from the available Missions in their engagement size. This will determine the Deployment Area the players use as well as specific Mission objectives and certain terrain features. You can either simply agree with your opponent on which Mission to play, or you can roll to randomly select a Mission using one of the following tables:
Scouting
D8 Mission
1-4 Reconnaissance
5-8 Show of Force
Skirmish
D8 Mission
1-2 Winds of War
3-4 Endless Pursuit
5-6 Counterattack!
7-8 The Call of Darkness
Operation
D8 Mission
1-2 The Order to Destroy
3-4 Emissary of Darkness!
5-6 Burning Sandstorm
7-8 Protect the Relic
Battle
D8 Mission
1-4 Protect the Base
5-8 Marshall Law
3. Assembling a Squad
Players must then assemble a Squad with a sum total Deployment Cost less than the listed Deployment Cost Limit for the engagement size.
4. Reading Mission Briefing
Each Mission has a Mission briefing that will detail the primary objectives that award points to the players. Some Mission briefings also list one or more Mission rules that will apply for the duration of the battle. The players should read and familiarize themselves with these before proceeding.
5. Creating the Battlefield
The players now create the battlefield and set up terrain features. Missions are played on rectangular hex-grid battlefields which measure 16x13 hexagonal tiles, or 202 total hexes, with the flat side facing each player.
6. Placing Objective Markers
The players now set objective markers up on the battlefield. Each Mission’s deployment map will show the players how many to set up and where each should be placed.
7. Determine who is Attacker and Defender
Players roll 1D8 to determine this. The highest value chooses who will be Attacker and Defender. The Attacker goes first in the engagement but the Defender chooses their Deployment Area.
8. Choose a Deployment Area
The Defender chooses their deployment area first followed by the Attacker.
9. Deploy Squads
Squad deployment is done in alternating order. Check Core_Rules#Deployment for more information. There may be more specific rules in the mission briefing.
10.Begin the Battle
Resolve any pre-battle rules then begin activation with the Attacker's first unit.
11.End the Battle
The battle ends when the number of turns pass in the mission briefing or all of one side's units have become destroyed or inoperable.
12.Determine the Victor
Each player can score a maximum of 7 points from primary objectives and a maximum of 7 points from secondary objectives for a total of 14 possible points (any excess victory points awarded are discounted).

Terminology

Term Definition
Accuracy Roll 1d8 that determines the outcome of a Ranged Attack.
Assault Roll 1d8 that determines the outcome of a Melee Attack.
Evasion Roll 1d8 that determines the outcome of an attempted Evasion.
Critical Hit Adds .5 of the Weapon's Base Damage as bonus damage (round up).
On-Target After an Accuracy/Assault Roll is successful but an Evasion Roll has yet to be conducted.
Classification Determined by the Total Defense Points of a Unit.
Line of Sight A straight, unobstructed line from an attacking Unit to its target.
Field of View The hexes in the front-left, front-right, and front-center in the direction a Unit is facing as well as every hex behind those hexes.
Blind Spot The hexes in the rear-left, rear-right, and rear-center in the direction a Unit is facing.
Standard Movement Also referred to as Standard Movement Points. The number of hexes a Unit can move in a single turn
Thruster Movement Only available if thrusters are on a Unit's model. Forfeit Ranged and Close Combat phases if used. The path a Unit takes is linear in the direction the player chooses. If an obstacle blocks the full travel length, the Unit stops one hex prior to that obstacle.
Action Points Also referred to as AP. Points used to determine how many actions can be performed in a single turn.
Command Actions Also referred to as CA. Any action NOT dealing with the Movement Phase or either of the two Combat Phases. Requires 2 AP to perform any CA.
Equipped Weapons Weapons that are being held in the hands of a Unit.
Mounted Weapons Weapons that cannot be swapped. Explode when destroyed, damaging the section it was attached to.
Carried Weapons Weapons that are being stored on the Unit but not Equipped. Max of 3 Weapons. Can be Equipped or Retrieved if space is available in the Unit's hand(s). These Weapons must be Equipped before using.
Base Damage How much damage a Weapon deals before modifications.
Fall Damage 2 ( Unit Classification * Elevation Height) to any Core Section that Unit chooses.
Collision Damage 2 ( Moving Unit Classification * Thrown Distance)
Throw Distance Attacker Classification - Defender Classification + 2
Systems Abilities that directly come from parts on the physical Unit model. Having these parts on the model does not automatically give the Unit the ability.
Mods Abilities that come from upgrades and tuning of the Unit's internal components which are not immediately visible on the model.
Traits Abilities granted to the Unit from the pilot.
Artificial Intelligence RoyRoy heads have their own sentience used for giving Drones autonomy.
Core Parts Any and all parts that make up the CORE of the unit- limbs and the armor attached to those limbs. e.g. head, head armor, chest, knee armor, etc.
Unit Sections Core parts that are grouped into individual sections. EG; Head, Arms, Legs, Torso, etc.
Core Type Determines your Unit's base Stats. Each Core Type provides different Stats.
Deployment Cost The overall Cost of a Unit toward the Deployment Cost Limit of any Engagement. This includes Weapons, Equipment, Defense, Systems, Mods, etc.
S.R.M. Stat Reduction Modifiers. This number reperesents how many times a Unit's base stats can be lowered to a minimum of 2 Accuracy, 2 Assault, and 2 Evasion.
Main Unit Refers to a single Unit that controls drones.


Core Rules
Core Rules | Datasheets | Unit Datasheet Creation | Abilities